Airlink APSUSB201W User Manual - Page 16
Configuring Wireless Printing
View all Airlink APSUSB201W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
8. Configuring Wireless Printing 8.1 Infrastructure Mode Printing The following section describes how to setup the Print Server for wireless printing. It is strongly recommended that you test the Print Server with a wired connection first before moving on to configure wireless printing. Note: You should use a wired connection to configure the following wireless settings before unplugging the network cable from the Print Server. Step 1 Open the web browser and type in the IP address of your Print Server. (Default is 192.168.1.254) Step 2 Verify the Printer Status is On line. Step 3 Click on Configuration and then Wireless. 15
15
8. Configuring Wireless Printing
8.1 Infrastructure Mode Printing
The following section describes how to setup the Print Server for wireless printing. It is
strongly recommended that you test the Print Server with a wired connection first before
moving on to configure wireless printing.
Note:
You should use a wired connection to configure the following wireless settings
before unplugging the network cable from the Print Server.
Step 1
Open the web browser and type in the IP address of your Print Server. (Default
is
192.168.1.254
)
Step 2
Verify the Printer Status is
On line
.
Step 3
Click on
Configuration
and then
Wireless
.