Airlink WLC010 Quick installation guide - Page 1
Airlink WLC010 Manual
View all Airlink WLC010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
11Mbps Wireless LAN PC Card Quick Installation Guide WLC010 This Quick Installation Guide only provides you with the basic instructions. For more detailed information, please refer to the Manual file on the provided CD. All other product names and trademarks in this document are trademarks of their respective companies. A. Hardware Installation System Requirements . Windows 98(SE)/Me/2000/XP . 16 MB of RAM, additional memory recommended . Available (Type II) PC card slot Installing the Hardware 1. The Wireless LAN Card can be inserted into your computer's PCMCIA slot when the computer power is either turned on or off. 2. When the Wireless LAN Card is inserted into the PCMCIA slot and the computer is turned on, a red LED will light up. 3. After installing the hardware, install the device driver and then install the Wireless LAN Card software. B. Driver Installation After installing the hardware, the Windows will detect the new device and displays the wizard. Follow the steps below to install the driver. For Windows 98(SE) For Windows 2000 1. When the wizard appears, click Next. Then select Search for the best driver. and click Next. 2. Insert the Installation CD into your CD-ROM drive. Check Specify a location and click Browse to specify the path to D:\Driver\Win9x where D is the CD-ROM drive letter and click Next. 3. When the driver is found, click Next to continue. NOTE: If prompted, insert your Windows 98 installation CD and then click OK. 4. Click Finish to complete the driver installation. 5. When prompted to restart your computer, click No and continue to the next task. 1. When the wizard appears, click Next. 2. Insert the Installation CD into your CD-ROM drive. Select Search for a suitable driver. and click Next. 3. Check Specify a location and click Next. 4. Click Browse to specify the path to D:\Driver\W2K where D is the CD-ROM drive letter. and click Open. and click OK. 5. When the driver is found, click Next to continue. 6. When the Digital Signature Not Found message appears, click Yes. 7. Click Finish to complete the driver installation. For Windows Me For Windows XP 1. When the wizard appears, select Specify the location. And click Next. 2. Insert the Installation CD into your CD-ROM drive Select the check boxes for both Search for the best driver and Specify a location. Click Browse to specify the path to D:\Driver\WinME where D is the CD-ROM drive letter and click Next. 3. When the driver is found, click Next to continue. 4. Click Finish to complete the driver installation. 1. When the wizard appears, select Install the software automatically (Recommended). 2. Insert the Installation CD into your CD-ROM drive and click Next. 3. Click the file under Location called d:\driver\winxp\netcw10.inf. (where D is the CD-ROM drive letter) and click Next. 4. When the Hardware Installation message appears, click Continue Anyway. 5. Click Finish to complete the driver installation.