Akai MPK49 Operation Manual - Page 25
Program Change Parameters
View all Akai MPK49 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
PROGRAM CHANGE PARAMETERS The following list of parameters can be accessed if the button event type is set to "Program Change". MIDI CHANNEL FIELD MIDI PORT/CHANNEL FIELD Program Change messages can be sent on one of two MIDI Ports, A or B, and one of 16 MIDI Channels on each port (i.e. A7). You may also assign Program Change to use the MIDI Common Channel. 1. Use the [] button to select the next field. PROGRAM CHANGE FIELD In this field you can set which Program Change Number the button will transmit when it is pressed. 1. Use [] buttons to select Program Change field. 2. While in Program Change field, use [VALUE] dial to select desired Program Change Number. 3. Use the [>] button to select the next field. PORGRAM CHANGE FIELD BANK M FIELD Bank M describes the Most Significant Bit (MSB) of information. 1. Use [] buttons to select Bank M field. 2. While in Bank M field, use [VALUE] dial to select desired value. 3. Use the [>] button to select the next field. BANK M FIELD BANK L FIELD Bank L describes the Least Significant Bit (MSB) of information. 1. Use the [] buttons to select Bank L field. 2. While in Bank L field, use [VALUE] dial to select desired value. BANK L FIELD Note: You can also configure buttons to send Program Change messages only, without specifying Bank M and Bank L. While editing Bank M and Bank L fields of a button, use [VALUE] dial to set Bank M and Bank L to 'OFF' (beyond 000). This will cause the button to transmit only a Program Change message. 21