Alesis MidiVerb4 User Manual - Page 16
Storing Edited Programs - operators manual
View all Alesis MidiVerb4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Your First Session with the MIDIVerb 4 - Chapter 1 Storing Edited Programs Once you are satisfied with the changes you have made to an edited Program, or are creating a new Program from scratch, you will need to store your edited Program back into memory. The MidiVerb 4 will store the currently selected Program in nonvolatile memory (which is backed-up when the unit is turned off). If you edit a Program, the changes you made will still be there the next time you switch on the unit, even if you hadn't stored the edited Program into memory yet. However, if you select another Program from memory before storing the edited Program, your changes will be lost forever. 7 Although the MidiVerb 4 has two banks (Preset and User), you can only store Programs in the User bank. To store an edited Program: Press [STORE]. The [STORE] button will flash, and the display will read: Store as XXX (nnnnnnnn)? ...whereas XXX is a Program location number from 00-127 in the User bank, and nnnnnnnn is the Program's name. Use the [VALUE] knob to select which location (00-127) you wish to store the selected Program into. You can only store Programs into the User bank. If you select a Program from the Preset bank and store it, you will automatically be taken into the User bank. If desired, change the Program's name by pressing [A/NAME]. This moves the cursor from the location number field to the first character in the Program's name. Turn the [VALUE] knob to scroll through the list of available characters. Use the [C/] buttons to move the cursor's position left and right, respectively. If you need to move the cursor back to the Program number field to select a different location to store to, press [B/ESC]. Note: To abort this operation - and thereby not store the edited Program - simply press any other button except [STORE]. Press [STORE] again. The [STORE] button's LED will momentarily flash quickly, while the display reads: Program nnnnnnnn Stored! ...whereby nnnnnnnn is the Program's name. The [STORE] button will turn off and the display will revert to wherever it was before [STORE] was pressed for the first time. MidiVerb 4 Reference Manual 15