Alesis NanoVerb 2 Quick Start Guide - Page 6

TROUBLESHOOTING GUIDE SYMPTOM CAUSE SOLUTION The Power LED does not light when the unit is powered on No power Check that the power cable is plugged in properly Sound is distorted, signal LED is lit red Input level is too high Turn down the Input Level control Sound is excessively noisy Input level is too low Turn up the Input Level control Green "Input" LED barely lit Output level is too low and Aux Return on mixer is up full Turn Output up and reduce Aux Return level on mixer No audio is heard Bypass function is on with Mix turned 100% wet Turn the Mix control to the left or press the Bypass footswitch Output level is too low Turn the Output control to the right Hum or noise from output Ground loop, unshielded cables Try plugging the unit into another power outlet or use different audio cables 6