Alesis Nitro Max Kit User Guide - Page 12
Press the P
![]() |
View all Alesis Nitro Max Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
(2.2) Rear Panel 9V POWER 0.5A USB TRIGGER INPUT CYM 2 TOM 4 AUDIO OUTPUT R L/MONO AUX IN 2 1 3 54 6 7 1. Power Input Connect the included power adapter (9V DC, 500mA, center pin-positive) here, then connect the adapter to wall power. Note: To save energy, the drum module will shut down automatically after 30 minutes of no activity. If you do not need this feature or want to adjust the shutdown time, do the following: I. Power on the drum module. II. Press Utility repeatedly until the Power page (POW) is selected. III. Use the - / + buttons to adjust the shutdown time (30 - 60 minutes, or OFF). 2. Power Button Press the Power button to turn the module on or o . 3. USB-B Port Use a USB cable (sold separately) to connect the module to your computer to send MIDI information. Note: Only MIDI information is sent over the USB connection, not audio. 4. Tom 4 Trigger Input (1/4" [6.35 mm] TRS) Use a standard 1/4" TRS cable to connect this input to an optional drum pad, which will trigger the Tom 4 sound. 5. Crash 2 Trigger Input (1/4" [6.35 mm] TRS) Use a standard 1/4" TRS cable to connect this input to an optional cymbal pad, which will trigger the Crash 2 sound. 6. Audio Output (1/4" [6.35 mm] TRS) Connect this output to a speaker, amplifier system, or mixer. 7. Aux Input (1/8" [3.5 mm] TRS) Connect an auxiliary device such as a phone, MP3 player, or CD player here. This audio will be heard in the Audio Outputs and Phones output. During recording, the audio from this input will not be recorded. 12
![](/manual_guide/products/alesis-nitro-max-kit-user-guide-8e12a36/12.png)