Alesis Turbo Mesh Kit Turbo Drum Module - User Guide v1.2 - Page 7
Using Kits, Selecting a Kit, Adjusting Kit Volumes, Playing Along with Patterns, Selecting
View all Alesis Turbo Mesh Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Operation Using Kits Selecting a Kit To select one of the module's 10 preset kits, do one of the following: • With the Variation button lit red, press the 1, 1 2 3 4 5 VARIATION 2, 3, 4, or 5 button to select Kit 1, 2, 3, 4, or 5 respectively. • With the Variation button lit green, press the 1, 2, 3, 4, or 5 button to select Kit 6, 7, 8, 9, or 10 respectively. The Kit Number will appear on the Display. Once you have selected a kit, you can select others by repeating one of the steps above or by using the - / + buttons. Adjusting Kit Volumes To adjust the volume of each separate kit: 1. Do one of the following: • With the Variation button lit red, double- 1 2 3 4 press the 1, 2, 3, 4, or 5 button to select Kit 1, 2, 3, 4, or 5 respectively. • With the Variation button lit green, double-press the 1, 2, 3, 4, or 5 button to select Kit 6, 7, 8, 9, or 10 respectively. 2. The Display will show the volume level (L00 - L32). Use the - / + buttons to set the kit's volume level (the default volume level is L28). 3. Wait 4 seconds. The kit's new volume setting will be saved automatically. 5 VARIATION Playing Along with Patterns Selecting and Playing a Pattern To select one of the 30 preset patterns: 1. Press the Pattern button to enter Pattern Mode. The button's LED will light up, and the Display will show the current Pattern Number. PATTERN 2. Use the - / + buttons to select a pattern. (You can hold down the - or + button to scan quickly through the list). 3. Press the Start/Stop button to start the pattern's playback. 4. Play along to the pattern! START /STOP 5. Press the Start/Stop button to stop the pattern's playback. Adjusting the Pattern Volume To adjust the volume of each separate pattern: 1. Double-press the Pattern button. PATTERN 2. The Display will show the volume level (00 - 32). Use the - / + buttons to set the pattern's volume level (the default volume level is 25). 7