Alpine 9845 Owners Manual - Page 17

SETUP You can flexibly customize the unit to suit your own preferences and usage. From the SETUP menu, choose from Sound Customizing, Visual Customizing, etc., to make your desired settings. CDE-9845 BAND Rotary encoder g f MUTE/SETUP CDE-9843 BAND Rotary encoder g f MUTE/SETUP CDE-9841 BAND 4/3 A typical SETUP procedure is shown in steps 1 to 4 as follows. See below for further information about each SETUP menu. 1 Press and hold MUTE/SETUP for at least 2 seconds. SETUP mode is activated. 2 Press g or f to select the desired SETUP menu. (e.g. Select SUBW) CDE-9845 ILLUMI → DIMMER → SUBW → CDDA / MP3/CDDA → SCROLL TYPE → SCROLL → AUX IN → *1 (AUXILIARY/TV/VCR/GAME) → POWER IC → AREA*2 → DEMO → ILLUMI *1 Displayed only when AUX IN is ON. *2 Refer to "Listening to Radio" (page 6). CDE-9843 DIM → SUBW → CD-DA / CDDA/MP3 → SCR TYPE → SCR → PWR → AREA*2 → DIM *2 Refer to "Listening to Radio" (page 6). CDE-9841 SUBW → PWR → SUBW 3 Press BAND to change the setting. (e.g. Select SUBW ON or SUBW OFF.) 4 Press MUTE/SETUP for at least 2 seconds again. The display returns to normal mode. Sound Customizing Subwoofer On and Off SUBW ON (Initial setting) / SUBW OFF When the subwoofer is on, perform the steps below to adjust the subwoofer output level. 1 Press the Rotary encoder (CDE-9845/CDE-9843 only) or press MODE (CDE-9841 only) repeatedly to select the SUBW mode. BASS → TREBLE → SUBWOOFER → BALANCE → FADER → DEFEAT → VOLUME → BASS 2 To adjust the level, turn the Rotary encoder (CDE-9845/ CDE-9843 only) or press 4 and 3 (CDE-9841 only). g f MODE MUTE/SETUP 16-EN