Alpine 9845 Owners Manual - Page 20

Hi Temp, No Disc, Error, Protect, Unsuport - specifications

Page 20 highlights

Indication for CD Player HI TEMP • Protective circuit is activated due to high temperature. - The indicator will disappear when the temperature returns to within operation range. NO DISC • No CD is inserted. - Insert a CD. • Although a disc is inserted, "NO DISC" is displayed and the unit does not start to play or eject the disc. - Remove the disc by following these steps: Press the c button again for at least 2 seconds. If the disc still does not eject, consult your Alpine dealer. ERROR • Mechanism error. 1) Press the c button and eject the CD. If not ejecting, consult your Alpine dealer. 2) When the error indication remains after ejecting, press the c button again. If the error indication still does not turn off after pressing the c button for a few times, consult your Alpine dealer. • When "ERROR" is displayed: If that the disc cannot be ejected by pressing c, press the RESET switch (refer to page 5) and press c again. If the disc still cannot be ejected, consult your Alpine dealer. • The disc is not compatible with the unit. - Insert a disc which is compatible with the unit. PROTECT (CDE-9845 only) • A copy-protected WMA file was played back. - You can only play back non-copy-protected files. UNSUPORT (CDE-9845 only) • The disc is not written in a MP3/WMA supported format. - Use a disc written at the MP3/WMA supported format. UNSUPORT (CDE-9843 only) • The disc is not written in a MP3 supported format. - Use a disc written at the MP3 supported format. Specifications FM TUNER SECTION Tuning Range Mono Usable Sensitivity 50 dB Quieting Sensitivity Alternate Channel Selectivity Signal-to-Noise Ratio Stereo Separation Capture Ratio 87.7 - 107.9 MHz** 9.3 dBf (0.8 µV/75 ohms) 13.5 dBf (1.3 µV/75 ohms) 80 dB 65 dB 35 dB 2.0 dB AM TUNER SECTION Tuning Range Sensitivity (IEC Standard) 530 - 1,710 kHz** 22.5 µV/27 dB CD PLAYER SECTION Frequency Response Wow & Flutter (% WRMS) Total Harmonic Distortion Dynamic Range Signal-to-Noise Ratio Channel Separation 5 - 20,000 Hz (±1 dB) Below measurable limits 0.008% (at 1 kHz) 95 dB (at 1 kHz) 105 dB 85 dB (at 1 kHz) PICKUP Wave length Laser power 795 nm CLASS I GENERAL Power Requirement 14.4 V DC (11-16 V allowable) Power Output 16 W RMS × 4* * Primary amplifier ratings per CEA-2006 Standard • Power output: measured at 4 Ohms and ≤ 1% THD+N • S/N: 80 dBA (reference: 1 W into 4 Ohms) Bass +20 dB/-14 dB at 100 kHz Treble ±14 dB at 10 kHz Maximum Pre-Output Voltage 2 V/10 k ohms Weight 1.6 kg (3 lbs. 8 oz) CHASSIS SIZE Width Height Depth 178 mm (7") 50 mm (2") 160 mm (6-1/4") NOSEPIECE SIZE Width Height Depth 170 mm (6-11/16") 46 mm (1-13/16") 18 mm (11/16") • Due to continuous product improvement, specifications and design are subject to change without notice. ** CDE-9845/CDE-9843: When you choose "AREA 2" in the section "Changing the Radio Frequencies for each Country" (page 6), the tuning range is as follows. FM : 87.5 - 108.0 MHz AM : 531 - 1,602 kHz 19-EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

19
-EN
Indication for CD Player
HI TEMP
Protective circuit is activated due to high temperature.
-
The indicator will disappear when the temperature
returns to
within operation range.
NO DISC
No CD is inserted.
-
Insert a CD.
Although a disc is inserted, “NO DISC” is displayed and the
unit does not start to play or eject the disc.
-
Remove the disc by following these steps:
Press the
c
button again for at least 2 seconds.
If the disc still does not eject, consult your Alpine dealer.
ERROR
Mechanism error.
1)
Press the
c
button and eject the CD.
If not ejecting, consult your Alpine dealer.
2)
When the error indication remains after ejecting, press the
c
button again.
If the error indication still does not turn off after pressing
the
c
button for a few times, consult your Alpine dealer.
When “ERROR” is displayed:
If that the disc cannot be ejected by pressing
c
, press the RESET
switch (refer to page 5) and press
c
again.
If the disc still cannot be ejected, consult your Alpine dealer.
The disc is not compatible with the unit.
-
Insert a disc which is compatible with the unit.
PROTECT
(CDE-9845 only)
A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
UNSUPORT
(CDE-9845 only)
The disc is not written in a MP3/WMA supported format.
- Use a disc written at the MP3/WMA supported format.
UNSUPORT
(CDE-9843 only)
The disc is not written in a MP3 supported format.
-
Use a disc written at the MP3 supported format.
Specifications
FM TUNER SECTION
Tuning Range
87.7 – 107.9 MHz**
Mono Usable Sensitivity
9.3 dBf (0.8 µV/75 ohms)
50 dB Quieting Sensitivity
13.5 dBf (1.3 µV/75 ohms)
Alternate Channel Selectivity
80 dB
Signal-to-Noise Ratio
65 dB
Stereo Separation
35 dB
Capture Ratio
2.0 dB
AM TUNER SECTION
Tuning Range
530 – 1,710 kHz**
Sensitivity (IEC Standard)
22.5 µV/27 dB
CD PLAYER SECTION
Frequency Response
5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS)
Below measurable limits
Total Harmonic Distortion
0.008% (at 1 kHz)
Dynamic Range
95 dB (at 1 kHz)
Signal-to-Noise Ratio
105 dB
Channel Separation
85 dB (at 1 kHz)
PICKUP
Wave length
795 nm
Laser power
CLASS I
GENERAL
Power Requirement
14.4 V DC
(11–16 V allowable)
Power Output
16 W RMS
×
4*
* Primary amplifier ratings per CEA-2006 Standard
Power output: measured at 4 Ohms and
1% THD+N
S/N: 80 dBA (reference: 1 W into 4 Ohms)
Bass
+20 dB/-14 dB at 100 kHz
Treble
±14 dB at 10 kHz
Maximum Pre-Output Voltage
2 V/10 k ohms
Weight
1.6 kg (3 lbs. 8 oz)
CHASSIS SIZE
Width
178 mm (7")
Height
50 mm (2")
Depth
160 mm (6-1/4")
NOSEPIECE SIZE
Width
170 mm (6-11/16")
Height
46 mm (1-13/16")
Depth
18 mm (11/16")
Due to continuous product improvement, specifications and design
are subject to change without notice.
** CDE-9845/CDE-9843:
When you choose “AREA 2” in the section “Changing the Radio
Frequencies for each Country” (page 6), the tuning range is as
follows.
FM : 87.5 - 108.0 MHz
AM : 531 - 1,602 kHz