Alpine CDA 9883 Owner Manual - Page 21

External Device Connecting to an External Amplifier POWER IC ON (Initial setting) / POWER IC OFF When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier. POWER IC OFF: Use this mode when the line output of this unit is used to drive an external amplifier. In this setting, the head unit's internal amplifier is turned OFF and can not drive speakers. Amplifier Amplifier Front left Front right Rear left Rear right POWER IC ON : The speakers are driven by the built-in amplifier. SPEAKER RIGHT FRONT Speakers Front right SPEAKER RIGHT REAR SPEAKER LEFT REAR Rear right Rear left SPEAKER LEFT FRONT Front left • No sound is produced by the system when the power output is set to OFF. General Setting Turning Mute Mode On/Off (INT Mute) MUTE ON / MUTE OFF (Initial setting) If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. Setting the AUX Mode (V-Link) AUX IN ON / AUX IN OFF (Initial setting) You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to this component. You can change the AUX name display when AUX IN is set to ON. Press / /ENT when AUX IN is set to ON, and select AUX NAME by turning the Rotary encoder, and then press / /ENT. After that, turn the Rotary encoder to select the desired AUX name. If the KCA-410C is connected, it is possible to select two AUX names. • Via KCA-410C, up to 2 external devices with RCA output can be connected. In this case, press SOURCE/ to select AUX mode and then press BAND to select your desired device. Changer Name Setting CHANGER (Initial Setting) / USB / PORTABLE This setting is used when the head unit is connected to the USB Adapter for MP3 (KCA-620M). You can set the name to be displayed on the unit depending on the device to which the USB Adapter for MP3 (KCA-620M) is connected. Setting the External Digital Input D-AUX ON / D-AUX OFF (Initial setting) When an ALPINE Ai-NET compatible digital audio processor (PXA-H701) and a DVD player (DVE-5207) not compatible with AiNET are connected, set Digital AUX to ON to enjoy 5.1-channel surround sound. • Press SOURCE/ , and select the DIGITAL-AUX mode, and adjust the volume, etc. • Depending on the connected audio processor, DVD player sound may continue to be output, even though the source is changed to another one. If this occurs, set the DVD player's power to OFF. HD Radio (Only when HD Radio is connected) HD Radio Station Call Setting (STATION CALL) SHORT (Initial setting) / LONG In the HD Radio mode, the number of display characters for the HD Radio station name can be selected. SHORT : LONG : 7 characters (FM) 4 characters (AM) 56 characters Digital Seek ON/OFF Setting DIG SEEK ON / DIG SEEK OFF (Initial Setting) ON : OFF : SEEK UP/DOWN is used only for Digital Radio Station. SEEK UP/DOWN is used for all Radio Stations. 19-EN