Alpine CDE-151 Owners Manual - Page 8
Getting Started - demo mode
View all Alpine CDE-151 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Getting Started Rotary encoder AUDIO/SETUP /ENTER e SOURCE/ Source Selection Press SOURCE to change the source. TUNER DISC USB AUDIO/iPod*1 AUXILIARY*2 TUNER *1 Only for CDE-152/CDE-151 and when the iPod/iPhone is connected. *2 Only when AUX SETUP is set to ON. Refer to "Setting the AUX SETUP mode" on page 19. Detaching and Attaching the Front Panel Detaching Accessory List • Head Unit 1 • Power Cable 1 • Mounting Sleeve 1 • Bracket Key 2 • Screw (M5 × 8 4 • Owner's Manual 1 set Turning Power On and Off Press SOURCE to turn on the unit. Note • The unit can be turned on by pressing any other button except and e (Release). Press and hold SOURCE for at least 2 seconds to turn off the unit. Note • The first time power is turned on, the volume will start from level 12. Notes • The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. • When detaching the front panel, do not apply excessive force as it may result in malfunction. Attaching Demonstration Function This unit has a demonstration feature for display. When Demo mode is set to ON (initial setting), the unit starts the demonstration if there is no operation for 30 seconds. When installing this unit in a car for the first time, the DEMO OFF screen will be displayed for 30 seconds after turning on the unit. Press ENTER within 30 seconds to turn off the Demonstration mode*. Otherwise, the Demo mode remains ON and the unit starts the demonstration if there is no operation for 30 seconds. * The operation is the same as setting DEMO MODE to OFF in the Setup menu. However, if the unit is disconnected from the vehicle's battery, DEMO MODE will be switched to ON automatically when the unit is used next time. If you want to completely close the Demo mode, set DEMO MODE to QUITE OFF. For details, please refer to "Setting the Demonstration mode" on page 19. Notes • Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. • Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake. 8-EN