Alpine CDE-152 Owners Manual - Page 18

Option Menu Setting You can quickly adjust the setting items relevant to the current SOURCE by using Option Menu. 1 Press and hold ENTER/OPTION for at least 2 seconds to activate the Option menu of the current source. Note • The option menu varies depending on the source. 2 Turn the Rotary encoder to select the desired setting item, and then press ENTER. 3 Turn the Rotary encoder to change the setting, and then press ENTER. After the setting, the display will return to the current source automatically.  Setting item: TUNER mode: TUNER SET*1  SOURCE VOL*2 DISC mode: CD SET*3  SOURCE VOL*2 USB mode: SOURCE VOL*2 iPod mode (CDE-152/CDE-151 only): APP DIRECT*4  iPod SET*5  SOURCE VOL*2 AUX mode: AUX SET*6  SOURCE VOL*2 *1 The setting items are the same as TUNER setting in SETUP mode. For details, refer to "SETUP" on page 18. *2 You can individually emphasise or weaken the volume level of the current source to create your own tonal preference. The setting values in Option mode and in SETUP mode are linked. Refer to "Setting the Source Volume Level" on page 14. *3 PLAY MODE can be selected in this mode. For details, refer to "Playing MP3/WMA Data (PLAY MODE)" on page 19. *4 Refer to "Setting the iPod Control" on page 21. *5 These settings are the same as those accessed through the SETUP mode. For details, refer to "iPod/iPhone Setting" on page 20. *6 AUX NAME can be selected in this mode. For details, refer to "Setting the AUX NAME mode" on page 19. Notes • Press r to return to the previous mode. • Pressing and holding r for at least 2 seconds will return to normal mode. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. SETUP AUDIO/SETUP SOURCE/ Rotary encoder /ENTER Setting You can flexibly customize the unit to suit your own preferences and usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting, etc., can be modified. Use steps 1 to 5 to select one of the SETUP modes to modify. See the applicable section below for details about the selected SETUP item. 1 Press and hold AUDIOSETUP for at least 2 seconds to activate the SETUP mode. 2 Turn the Rotary encoder to select the desired item, and then press ENTER. (e.g. Select GENERAL) AUDIO*1  GENERAL  DISPLAY  TUNER  iPod*2 GENERAL: CLOCK ADJ*3  AUX SETUP*4  AUX NAME*5  PLAY MODE  DEMO MODE DISPLAY: DIMMER  TEXTSCROLL TUNER: TUNER FREQ iPod: iPod LIST *1 Refer to "Audio Setup" on page 13. *2 CDE-152/CDE-151 only. *3 Refer to "Setting Time" on page 9. *4 Not displayed when the current source is AUXILIARY. *5 Displayed only when AUX SETUP is set to ON. 3 Turn the Rotary encoder to select a setting item, and then press ENTER. (e.g. Select AUX SETUP) 4 Turn the Rotary encoder to change the setting, and then press ENTER. (e.g. Select AUX ON or AUX OFF) 5 Press and hold AUDIOSETUP for at least 2 seconds to return to normal mode. Notes • Press r to return to the previous mode. • Pressing and holding r for at least 2 seconds will return to normal mode. 18-EN