Alpine CDE-154BT Owner's Manual (english) - Page 29

• In the call waiting mode, press and hold 1 or 2 for at least 2 seconds to hang up call1 or call2, and the other call will be answered automatically. (The action depends on the paired device.) • In the call waiting mode, you can press k to change the display between waiting number (1or 2) and caller name. Preset a number in the Phone Menu (Shortcut dial) Assign numbers that you dial frequently to presets for quick recall. You can assign up to six frequently called phone numbers to number presets. Select a number you want to preset from the Phone Menu list (PHONE BOOK, DIALED, etc.). Press and hold any one of the preset buttons (1 through 6) as the one that you wish to store the number for at least 2 seconds. The phone number you selected is stored in presets. Notes • If the name has several numbers registered in the phone book, press ENTER after selecting the name. Turn the Rotary encoder to choose the desired number. Press and hold any one of the preset buttons (1 through 6) for at least 2 seconds. The selected number is stored as a preset number. • A total of 30 phone numbers can be stored in the preset memory ( 6 numbers for each Smartphone in the paired device list). If a Smartphone is deleted from the paired device list, the stored preset numbers of this Smartphone are deleted, even when it is paired again. • If you store a phone number in a preset with a previously stored number, the current number will be cleared and replaced by the new one. Dialing the preset number 1 Press any one of the preset buttons (1 through 6) that has had a number stored in the phone mode. The information (name/number) stored in the preset station is displayed. 2 Press ENTER or f. The stored preset number is dialed directly. Adjusting the volume when receiving a Call While calling, you can adjust the volume. Turn the Rotary encoder to adjust the volume. Note • You may need to increase volume from your regular audio listening source level. However, increasing the volume excessively may result in feedback. Feedback is directly related to the volume. Turning down the volume as low as acceptable, will reduce it. Positioning the microphone in a direction away from the main car speakers (e.g. clipped on sun visor) may also reduce feedback at high volume. Muting the microphone input quickly (Voice Mute) During a call, activating the Voice Mute function will instantly mute the microphone input. Your voice will not be heard by the caller. During a call, press  to mute the microphone input. Press  again to bring the microphone input back to its previous volume level. Call Switching Operation During a call, this function allows you to initiate the transfer of the audio between the Smartphone and the speakers in the car. During a call, press BAND or press and hold  for at least 2 seconds to switch the call sound between the unit and Smartphone. Note • Depending on the Smartphone, this operation may not be possible. BLUETOOTH Audio Operation With a Bluetooth compatible Smartphone or music player, it's possible to play and control music playback wirelessly*. * To play back audio, a Smartphone or a portable player conforming to A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/ Video Remote Control Profile) is required. Not all functions work with all devices. Notes • Set BT IN to ON when you want to use BLUETOOTH Audio function. Refer to "Setting the BLUETOOTH Connection (BT IN)" on page 25. • During a call, sound on the BLUETOOTH audio source is muted. • If you operate the Hands-free phone (e.g. searching in the phone book) while using the BLUETOOTH Audio function, BLUETOOTH Audio playback may be affected. Recalling the BLUETOOTH Audio Mode Press V/SOURCE to select the BT AUDIO mode. Selecting the desired Song Press  or  to select the desired Song. Pressing and holding  or  will fast backward/fast forward track continuously. Note • The action depends on the paired device. Pausing Press . A playback stops. Pressing again will resume a playback. Selecting the desired Group Press  or  to select the desired Group. Note • This function is not available on all paired devices. 29-EN