Alpine CDE-172BT Owners Manual - Page 22

Useful Functions Adjusting Bass Level/ Mid Level/ Treble Level/ Subwoofer Level/ Balance (Between Left and Right)/ Fader (Between Front and Rear) 1 Press /SETUP. 2 Rotate the control dial to adjust the each mode, then press it. Each press changes the mode as follows: BASS MID TREBLE SUBW BALANCE FADER Bass Level Mid Level Treble Level Subwoofer Level Balance Fader -7 to +7 -7 to +7 -7 to +7 OFF to 0 to +15 L15 to R15 R15 to F15 3 Press /SETUP to return the normal mode. Notes • If no operation is performed for 5 seconds, the unit automatically returns to normal mode. • When Bass/Mid/Treble/Subwoofer Level is adjusted, BASS ENGINE SQ is set to [OFF] (page 22). Setting the BASS ENGINE SQ Creating the ideal Bass impact for your musical taste using BASS ENGINE SQ. 1 Press . 2 Rotate the control dial to adjust [BASS ENGINE], then press it. Setting contents: [OFF], [1]-[6] Note When Bass/Mid/Treble/Subwoofer Level is adjusted, BASS ENGINE SQ is set to [OFF] (page 22). Using Siri Eyes Free (CDE-175BT/ CDE-172BT/ UTE-73BT only) Siri Eyes Free allows you to use an iPhone handsfree by simply speaking into the microphone. This function requires you to connect an iPhone to the unit via BLUETOOTH. Availability is limited to iPhone 4s or later. Make sure that your iPhone is running the latest iOS version. You must complete BLUETOOTH registration and connection configurations for the iPhone with the unit in advance. For details, see "Preparing a BLUETOOTH Device (CDE-175BT/ CDE-172BT/ UTE-73BT only)" (page 11). To select the iPhone, press and hold /SETUP for at least 2 seconds, then select [BLUETOOTH] [AUDIO DEVICE] (page 26). 1 Activate the Siri function on the iPhone. For details, refer to the operating instructions supplied with the iPhone. 2 Press VOICE. The voice command display appears. 3 After the iPhone beeps, speak into the microphone. The iPhone beeps again, then Siri starts responding. To deactivate Siri Eyes Free Press VOICE. Notes • The iPhone may not recognize your voice depending on usage conditions. (For example, if you are in a moving car.) • Siri Eyes Free may not function properly, or the response time may lag in locations where iPhone signals are difficult to receive. • Depending on the iPhone's operating condition, Siri Eyes Free may not function properly, or may quit. • If you play a track with an iPhone using the BLUETOOTH audio connection, when the track starts playback via BLUETOOTH, Siri Eyes Free automatically quits and the unit switches to the BLUETOOTH audio source. • When Siri Eyes Free is activated during audio playback, the unit may switch to the BLUETOOTH audio source even if you do not specify a track to play. • When connecting the iPhone to the USB port, Siri Eyes Free may not function properly, or may quit. 22-EN