Alpine CDE 9874 Owners Manual - Page 8
Getting Started - manual
UPC - 793276711434
View all Alpine CDE 9874 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Getting Started CDE-9874 Rotary encoder / /ENT SOURCE/ / MUTE (Release) SOUND/SETUP CDE-9872 / /ENT SOURCE/ • The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. • To protect the front panel, place it in the supplied carrying case. • When detaching the front panel, do not apply excessive force as it may result in malfunction. Attaching 1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. 2 Push the left side of the front panel until it locks firmly into the main unit. / MUTE/SETUP AUDIO (Release) Accessory List • Head unit 1 • Power cable 1 • Mounting sleeve 1 • Carrying case 1 • Bracket key 2 • Screw (M5 × 8 4 • Owner's Manual 1 set Turning Power On and Off Press SOURCE/ to turn on the unit. • The unit can be turned on by pressing any other button except and (Release). Press and hold SOURCE/ for at least 2 seconds to turn off the unit. • The first time power is turned on, the volume will start from level 12. • Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. • Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake. Initial System Start-Up Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc. 1 Turn off the unit power. 2 Remove the detachable front panel. 3 Press RESET with a ballpoint pen or similar pointed object. 1 RESET switch Detaching and Attaching the Front Panel Detaching 1 Turn off the unit power. 2 Press (Release) at the lower left side until the front panel pops out. 3 Grasp the left side of the front panel and pull it out. Adjusting Volume Turn the Rotary encoder (CDE-9874 only) or press and (CDE-9872 only) until the desired sound is obtained. 6-EN