Alpine CDE9852 Owners Manual - Page 24
Installation - owners manual
UPC - 793276711267
View all Alpine CDE9852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installation Detachable Front Panel Caution When you install this unit in your car, do not remove the detachable front panel. If the detachable front panel is removed during installation, you might press too hard and warp the metal plate that holds it in place. Accessory List • Head unit 1 • Power cable 1 • Mounting sleeve 1 • Carrying case 1 • Bracket key 2 • Screw (M5 × 8 4 • Owner's Manual 1 set • The main unit must be mounted within 35 degrees of the horizontal plane, back to front. Less than 35° Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle's chassis. • For the screw marked "*2", use an appropriate screw for the chosen mounting location. Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDE-9852. Connect all other leads of the CDE-9852 according to details described in the CONNECTlONS section. 3 Slide the CDE-9852 into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the detachable front panel. Removal 1. Remove the detachable front panel. 2. Insert the bracket keys into the unit, along the guides on either side. The unit can now be removed from the mounting sleeve. This Unit Bracket Keys (Included) 3. Pull the unit out, keeping it unlocked as you do so. 1 Mounting Sleeve (Included) Dashboard Face plate This Unit Remove the Detachable Front Panel (refer to page 6). Slide mounting sleeve from main unit (see "Removal" on page 23). 2 Hex Nut (M5) Screw this unit Ground Lead *3 Screws (M5 × 8) (Included) Mounting Bracket • Secure the ground lead of the unit to a clean metal spot using a screw (*3) already attached to the vehicle's chassis. Metal Mounting Strap Ground Lead *2 Bolt Stud *1 Chassis This Unit 23-EN