Alpine D100 Owners Manual - Page 74

Installing the Power Amplifier This Power Amplifier is designed for use only with the IVA-D100. If products other than IVA-D100 are connected to the supplied Power Amplifier, its specified performance is not guaranteed. When mounting with Velcro fasteners When mounting the Power Amplifier with the Velcro fasteners, be sure to choose a flat location. Do not hang the unit from the bottom of the dashboard or rear deck with the Velcro fasteners. 1 Remove the Protective paper and attach two pieces of Velcro fastener to the bottom of the Power Amplifier. Installing the DC/DC Converter Install the DC/DC Converter on the floor with the supplied flange-head tapping screws (M4 × 14). Flange-head tapping screws (M4 × 14) (Included) DC/DC Converter Power Amplifier Protective paper Protective paper Velcro Fasteners (Included) 2 Check the position, and then fix the Power Amplifier to the floor carpet. When mounting with Screws When mounting the Power Amplifier with the screws, be sure to choose a flat location. When making holes, be careful not to scratch any pipes or wires. 1 Install the Power Amplifier on the floor with the supplied hexagonal screw (M4 × 15). hexagonal screw (M4 × 15) (Included) Power Amplifier 70-EN