Alpine DVA-9861 Owners Manual - Page 28

Connecting to an External Amplifier POWER IC ON (Initial setting) / POWER IC OFF When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier. POWER IC OFF : Use this mode when the front and rear preamplifier of the unit are used to drive an external amplifier connected to the speakers. In this setting, the head unit's internal amplifier has no output to drive speakers. DVD Setup Amplifier Amplifier Front left Front right Rear left Rear right RETURN CLR SETUP ENT. Numeric keypad (0 to 9) POWER IC ON : The speakers are driven by the built-in amplifier. SPEAKER RIGHT FRONT Speakers Front right SPEAKER RIGHT REAR SPEAKER LEFT REAR Rear right Rear left SPEAKER LEFT FRONT Front left DVD Setup Operation • DVD Setup Operation is performed by the remote control unit. The following 4 steps are common to each of the DVD settings. Refer to the specific section for details. 1 Press SETUP before inserting a disc, or when in stop mode. The setup menu appears on the monitor. SETUP L ANGUAGES TV SCRE EN 16 9 PAR E NTA L OF F AUD I O SETUP CUS TOM S E T UP WI DE EN • No sound is produced by the system when the power output is set to OFF. • If an external amplifier only for the subwoofer is connected, set to ON. Setting the Digital Output OPT OUT ON / OPT OUT OFF (Initial setting) To connect to a digitally to an audio processor, the optical digital output must be turned ON. • If DVD Audio is used, sound is output via Ai-NET regardless of this setting. 2 Press or to select your desired setting item, then press ENT. Further items will be displayed. Setting items: LANGUAGES / TV SCREEN / PARENTAL / AUDIO SETUP*1 / CUSTOM SETUP*2 *1 Refer to "Audio Setup" on page 29. *2 Refer to "Custom Setup" on page 31. 3 Press , , or to change the setting, then press ENT. 26-EN