Alpine DVA-9861 Owners Manual - Page 34

SAT Radio Receiver (Optional) Rotary encoder / SOURCE/ BAND MENU POWER 3 Press or to select desired category. 4 Press or Holding down continuously. to select the desired channel. or will change channels • When using the remote control unit, an SAT Radio Channel can be directly called up with the numeric keypad of the remote control. 1 While in XM or SIRIUS Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote control. 2 Press ENT. on the remote control within 5 seconds to receive the Channel. If the channel number is 3 digits, the Channel is automatically received after the channel number is input. MODE FUNC. Preset buttons (1 through 6) TITLE SAT Receiver: XM or SIRIUS Receiver When an optional XM or SIRIUS Receiver Box is connected via the Ai-NET bus, the following operations may be performed. However, the XM Receiver and SIRIUS Receiver cannot be connected at the same time. Receiving Channels with the SAT Radio Receiver (Optional) About SAT Radio Satellite Radio* is the next generation of audio entertainment, with over 100 digital audio channels. For a small monthly fee, subscribers can hear crystal-clear music, sports, news and talk, coast-to-coast via satellite. For more information, visit XM's website at www.xmradio.com., or SIRIUS' website at www.sirius.com. To receive SAT Radio, the separately sold XMDirect™ or SIRIUS Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will be required. For details, consult you nearest Alpine dealer. * XM and its corresponding logos are trademarks of XM Satellite Radio Inc. * SIRIUS and its corresponding logos are trademarks of SIRIUS Satellite Radio Inc. • The SAT Receiver controls on the DVA-9861 are operative only when a SAT Receiver is connected. 1 Press SOURCE/POWER to select SAT Radio mode. 2 Press BAND to select between one of the three SAT Radio Preset Bands. Each press changes the band: XM mode: XM1 XM2 XM3 XM1 SIRIUS mode: SR1 SR2 SR3 SR1 Checking the SAT Radio ID Number A unique Radio ID number is required to subscribe to SAT Radio programming. Each third party XM or SIRIUS radio comes with this number. This number is an 8 character (for XM Radio) or 12 character (for SIRIUS Radio) alphanumeric number. It is printed on a label found on the SAT Receiver. It can also be displayed on the screen of the DVA-9861 in the following way. XM: 1 While receiving a SAT Radio band, press or to select channel "0" (for XM). The unit alternately displays "CH 00" or "RADIO ID" for 2 seconds, then the ID number for 10 seconds. While displaying "RADIO ID" as shown above, Demonstration (page 25) become nonfunctional. 2 To cancel the ID number display, set the channel to other than "0." SIRIUS: 1 While receving a SAT Radio band, press or to select channel "255" for SIRIUS. 2 Press TITLE until the ID No. appears in the display. CHANNEL No. CATEGORY NAME CHANNEL NAME ID No. COMP NAME CLOCK CHANNEL No. 3 To cancel the ID number display, set the channel to other than "255". • You cannot use "O," "S," "I," or "F" for the ID Number (XM radio Receiver only). • You can check the ID number printed on a label on your third party, SAT Radio Receiver package. 32-EN