Alpine IDA X100 Owners Manual - Page 42

Indication for SAT Receiver Mode • The XM or SIRIUS antenna is not connected to the XM or SIRIUS radio module. - Check whether the XM or SIRIUS antenna cable is attached securely to the XM or SIRIUS radio module. • Radio is being updated with latest encryption code. - Wait until encryption code is being updated. Channels 0 and 1 should function normally. (XM mode) (SIRIUS mode) • XM or SIRIUS signal is too weak at the current location. - Wait until the car reaches a location with a stronger signal. • Radio is acquiring audio or program information. - Wait until the radio has received the information. (XM mode) (SIRIUS mode) • The channel currently selected has stopped broadcasting. - Select another channel. • The user has selected a channel number that does not exist or is not subscribed to. - The unit will revert back to the previously selected channel. • There is no artist name/feature, song/program title, or additional information associated with the channel at that time. - No action needed. • If an error or other problem occurs. - Change channels or consult your Alpine dealer. Specifications FM TUNER SECTION Tuning Range Mono Usable Sensitivity 50 dB Quieting Sensitivity Alternate Channel Selectivity Signal-to-Noise Ratio Stereo Separation Capture Ratio 87.7-107.9 MHz 9.3 dBf (0.8 µV/75 ohms) 13.5 dBf (1.3 µV/75 ohms) 80 dB 65 dB 35 dB 2.0 dB AM TUNER SECTION Tuning Range Sensitivity (IEC Standard) 530-1710 kHz 22.5 µV/27 dB USB SECTION USB requirements USB 1.1/2.0 Max. Power Consumption 500mA File System FAT12/16/32 MP3 Decoding MPEG-1/2 AUDIO Layer-3 WMA Decoding Windows Media™ Audio (WMDRM10 is supported) AAC Decoding AAC-LC format ".m4a" file Number of Channels 2-Channel (Stereo) Frequency Response* 5-20,000 Hz (±1 dB) Total Harmonic Distortion 0.008% (at 1 kHz) Dynamic Range 95 dB (at 1 kHz) Signal-to-Noise Ratio 105 dB Channel Separation 85 dB (at 1 kHz) * Frequency response may differ depending on the encoder software/bit rate. GENERAL Power Requirement 14.4 V DC (11-16 V allowable) Power Output 18 W RMS × 4* *Primary amplifier ratings per CEA-2006 Standard • Power output: measured at 4 Ohms and 1% THD+N • S/N: 80 dBA (reference: 1 W into 4 Ohms) Maximum Pre-Output Voltage 2 V/10 k ohms Weight 1.0 kg (2 lbs. 3 oz) CHASSIS SIZE Width Height Depth 178 mm (7") 50 mm (2") 156 mm (6-1/8") NOSEPIECE SIZE Width Height Depth 170 mm (6-3/4") 46 mm (1-13/16") 28 mm (1-1/8") DETACHABLE FRONT PANEL SIZE Width Height Depth 108 mm (4-1/4") 46 mm (1-13/16") 36 mm (1-7/16") • Due to continuous product improvement, specifications and design are subject to change without notice. 40-EN