Alpine IDA X300 Owners Manual - Page 25
Audio Setting Only when external audio, processor is connected, General Setting - media receiver
UPC - 793276711489
View all Alpine IDA X300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Audio Setting (Only when external audio processor is connected) AUDIO is selected on the setup menu in step 2. Operating the External Audio Processor (USER PRESET) PRE-1 (Initial Setting) / PRE-2 / PRE-3 / PRE-4 / PRE-5 / PRE-6 Turn the Double Action encoder(iDA-X200 only) or Rotary encoder(iDA-X300 only) to select the desired preset number, and then press /ENTER. In normal mode, you can also call up the preset memory of the external audio processor by pressing and holding "PRESET" for at least 2 seconds. Refer to "Operating the External Audio Processor" on page 21. • For the operation of external audio processor, refer to the Owner's Manual of the external audio processor you purchased. Turning Media Xpander ON/OFF OFF (Initial setting) / ON When the Media Xpander is on, and external audio processor is connected, you can adjust the Media Xpander level. Setting the MX Level NON EFFECT / LEVEL 1 / LEVEL 2 / LEVEL 3 MX (Media Xpander) makes vocals or instruments sound distinct regardless of the music source. The FM radio, CD, USB memory and iPod, will be able to reproduce the music clearly even in cars with a lot of road noise. The initial setting is different depending on the source. Subwoofer On and Off SUBW ON (Initial setting) / SUBW OFF The adjustment can also be made by pressing and holding IMPRINT* (iDA-X200 only) or SOUND (iDA-X300 only) for at least 2 seconds. Refer to " Turning Subwoofer ON/OFF " (page 20). * For iDA-X200, when connecting IMPRINT audio processor, you can't turn the subwoofer ON or OFF by pressing IMPRINT. General Setting GENERAL is selected on the setup main menu in step 2. Setting of Calendar Display Pattern Switching (CALENDAR) M/D/Y (Initial setting) / Y/M/D / D/M/Y You can switch the calendar display pattern to be shown when the time is displayed. Y : M : D : ex. M/D/Y shows the year shows the month shows the day 12/31/2007 Setting the Clock Display (CLK MODE) 24H / 12H (Initial setting) You can select the clock display type, 12-hour or 24-hour, depending on your preference. Connecting an MP3 Changer (PLAY MODE) CD-DA (Initial setting) / CD-DA&MP3 Perform this setting when connecting MP3 changer. MP3 changer can playback CDs containing both CD and MP3 data. However, in some situations (some enhanced CDs), playback may be difficult. For these special cases, you can select playback of CD data only. When a disc contains both CD or the MP3 data, playback starts from the CD data portion of the disc. CD-DA : Only CD data can be played back. CD-DA&MP3 : Both CD data and MP3 file tracks can be played back. • Change discs after performing this setting. Sound (Beep) Guide Function (iDA-X200 only) Beep On (Initial setting) / Beep Off This function will give audible feedback with varying tones depending upon the button pressed. Turning Mute Mode On/Off (INT MUTE) INT MUTE ON / INT MUTE OFF (Initial setting) If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. • When Bluetooth is set to ADPT, INT MUTE cannot be set. Refer to "Setting the Bluetooth Connection" (page 22). • When the Bluetooth box is connected, set INT MUTE to OFF. Setting the AUX+ Mode AUX+ ON / AUX+ OFF (Initial setting) You can input the audio of a connected external device, (such as a portable player) to the iPod Direct connector of this unit, using an iPod Direct/RCA Interface cable. An external device and an iPod cannot be connected at the same time. AUX+ ON : Set to ON when an external device is connected. If SOURCE is pressed and AUX+ is selected, the sound of the external device is input to the unit. AUX+ OFF : Set to OFF when an iPod is connected. 23-EN