Alpine IDA X300 Owners Manual - Page 26
Display Setting - head unit
UPC - 793276711489
View all Alpine IDA X300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Setting the AUX+ NAME Mode AUX (Initial setting) / TV / DVD / PORTABLE / GAME You can change the AUX+ NAME when AUX+ is ON. Setting the AUX Mode (V-Link) AUX ON / AUX OFF (Initial setting) You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to this component. You can change the AUX NAME display when AUX is set to ON. Press /ENTER when AUX is set to ON, and select AUX NAME by turning the Double Action encoder (iDA-X200 only) or Rotary encoder (iDA-X300 only) , then press /ENTER. After that, turn the Double Action encoder (iDA-X200 only) or Rotary encoder (iDA-X300 only) to select the desired AUX name. If the KCA-410C is connected, it is possible to select two AUX names. • Via KCA-410C, up to 2 external devices with RCA output can be connected. In this case, press SOURCE to select AUX mode and then press BAND to select your desired device. Setting the Changer Name CHANGER (Initial setting) / PORTABLE When an optional changer is connected, you can set the displayed mode name. • The setting can be made only when a changer is connected. When two changers are connected, the CHANGER1 NAME/CHANGER2 NAME is displayed, and the setting can be made respectively. Setting the External Digital Input (DIGITAL AUX) DIGITAL AUX ON / DIGITAL AUX OFF (Initial setting) When an ALPINE Ai-NET compatible digital audio processor (PXA-H701) and a DVD player (DVE-5207) not compatible with Ai-NET are connected, set DIGITAL AUX to ON to enjoy 5.1-channel surround sound. You can change the D-AUX Name when DIGITAL AUX is set to ON. Press /ENTER when DIGITAL AUX is set to ON, and select D-AUX NAME by turning Double Action encoder (iDA-X200 only) or Rotary encoder (iDA-X300 only), then press /ENTER. • Press SOURCE , and select the D-AUX mode, and adjust the volume, etc. • After input selection is completed, turn the ignition off and back on again. Setting of the optical digital input switch is completed. • Depending on the connected audio processor, DVD player sound may continue to be output, even though the source is changed to another one. If this occurs, set the DVD player's power to OFF. Setting the AUX+ Level (AUX IN GAIN) LOW (Initial setting) / HI After setting to ON in "Setting the AUX+ Mode", this setting can be carried out. LOW: Decreases the external input audio level. HI: Increases the external input audio level. Connecting to an External Amplifier (POWER IC) ON (Initial setting) / OFF When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier. POWER IC OFF : Use this mode when the front pre-amplifier of the unit is used to drive an external amplifier connected to the speakers. In this setting, the head unit's internal amplifier has no output to drive speakers. iDA-X200 : Amplifier Amplifier Front left Front right Rear left Rear right iDA-X300 : Amplifier Front left Front right POWER IC ON : The speakers are driven by the built-in amplifier. Speakers SPEAKER RIGHT FRONT Front right SPEAKER RIGHT REAR Rear right SPEAKER LEFT REAR Rear left SPEAKER LEFT FRONT Front left • No sound is produced by the system when the power output is set to OFF. Demonstration DEMO ON / DEMO OFF (Initial setting) This unit has a Demonstration feature for the display. • To quit Demo mode, set to DEMO OFF. Display Setting DISPLAY is selected on the setup main menu in step 2. Dimmer Control MANUAL / AUTO (Initial setting) Set the Dimmer control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit's backlighting is too bright at night. Scroll Type Setting TYPE1 / TYPE2 (Initial setting) Choose from two scrolling methods. Select the type you prefer. TYPE1: The characters scroll from right to left, a single character at a time. TYPE2: Words are built up from left to right, a single character at a time. When the display is filled, it is cleared and the remaining words are displayed the same way until all words of the title have been shown. 24-EN