Alpine IVE-W535HD Owner's Manual (english) - Page 45
Adjusting the Time Correction (Time Correction), Adjusting the Crossover Settings (X-OVER)
View all Alpine IVE-W535HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Setting the Bandwidth Touch [ ] or [ ] of "Q Adjust" to select the bandwidth. Setting contents: 1 (Initial setting) / 2 / 3 2 To adjust another band, repeat step 1, and adjust all bands. 3 To store the adjusted setting value, touch and hold [Preset1], [Preset2], or [Preset3] for at least 2 seconds. • Settings exceeding the frequency of adjacent bands are not available. • While adjusting the Parametric EQ, you should consider the frequency response of the connected speakers. • When the parametric EQ is adjusted, the adjustment for Bass Max EQ becomes ineffective. • When Bass Max EQ is set, the interlinked Parametric EQ settings are also changed. We recommend storing Parametric EQ settings in the Preset in advance. • Touch [Flat] to initialize all values. • The Parametric EQ setting can be configured when Defeat is "Off." Calling the Parametric EQ adjusted value Calling the pre-set Parametric EQ adjusted value. Touch [Preset1], [Preset2], or [Preset3] on the Parametric EQ screen. The setting stored in the Preset will be recalled. Adjusting the Time Correction (Time Correction) [Time Correction] is selected on the Sound setup menu in step 3. Refer to "Sound Setup Operation" (page 42). Before performing the following procedures, refer to "About Time Correction" (page 46). Setting item: Time Correction 1 Touch [ms] or [cm] to select mode for making adjustments. Each time you touch, the onscreen button and correction mode changes. Correction mode ms: Adjust time. cm: Adjust listening position and distance from each speaker. 2 Touch [ ] or [ ] for each speaker to adjust the time or distance. 0.0msec to 9.9msec (0.1msec/step) 0.0cm to 336.6cm (3.4cm/step) All speaker setting values are adjustable in the range of 20ms or 680cm. 3 To store the adjusted setting value, touch and hold [Preset1], [Preset2], or [Preset3] for at least 2 seconds. • Touch [Flat] to set all values to 0.0. • If the Rear Speaker setting is "Off," the Rear Speaker setting cannot be edited (Refer to page 43). • If the Subwoofer setting is "Off," the Subwoofer setting cannot be edited (Refer to page 43). Calling the Time Correction Value Calling the pre-set time correction value. Touch [Preset1], [Preset2], or [Preset3] on the time correction screen. The setting stored in the Preset will be recalled. Adjusting the Crossover Settings (XOVER) [X-OVER] is selected on the Sound setup menu in step 3. Refer to "Sound Setup Operation" (page 42). Before performing the following procedures, refer to "About the Crossover" (page 47). Setting item: X-OVER 1 Touch [Channel] to select the channel. Each time you touch, the channel switches. • The channel being adjusted is displayed in red. Front HPF Rear HPF Subw. LPF 2 Adjust the crossover to your preference. Selecting the Cut-Off Frequency Touch [ ] or [ ] of "Freq.," then select the cut-off frequency. Setting contents: 20 / 25 / 31.5 / 40 / 50 / 63 / 80 (Initial setting) / 100 / 125 / 160 / 200 Hz Adjusting the Slope Touch [ ] or [ ] of "Slope," then adjust the HPF or LPF slope. Setting contents: 0 (Initial setting) / 6 / 12 / 18 / 24 dB/oct Adjusting the Level Touch [ ] or [ ] of "Level," then adjust the HPF or LPF level. Setting contents: -12 to 0 dB (Initial setting: 0) 3 Repeat steps 1 to 2 to make adjustment to the other channels. 45-EN