Alpine KTX-FUS8 Installation Manual - Page 2
Factory Stereo Removal, Open console storage. Use a Panel Removal Tool
 |
View all Alpine KTX-FUS8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Factory Stereo Removal 1. Use a Panel Removal Tool to unclip shifter trim bezel. 2. Open console storage. Use a Panel Removal Tool to unsnap the trim around cup holder and shifter. Lift away and remove. 3. Use a Panel Removal Tool to unsnap the small +12V accessory power panel in front of the shifter, unplug and remove. 4. Open upper storage tray above radio and remove rubber liner. Extract (2) 8mm screws from storage compartment. Note: On some models there my be a safety strap attached to this panel. Remove the T-20 torx screw below the passenger airbag light to remove panel. 5. Remove (2) 7mm screws from the top radio/ climate panel. 6. Extract (4) 7mm screws securing the radio's motor/chassis, unplug all connectors and remove. 2
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
Factory Stereo Removal
1.
Use a Panel Removal Tool
to
unclip shifter trim
bezel.
2. Open console storage. Use a Panel Removal Tool
to
unsnap
the
trim around
cup
holder and shifter. Lift
away and remove.
3. Use a Panel Removal Tool
to
unsnap the small
+
12V
accessory
power
panel in front
of
the
shifter, unplug
and
remove.
4. Open
upper
storage
tray
above radio and
remove rubber liner. Extract
(2)
8mm screws from
storage compartment. Note: On
some
models
there
my
be
a safety strap attached
to
this panel.
Remove the T-20
torx
screw below
the
passenger
airbag light
to
remove panel.
5. Remove
(2)
7mm screws from
the
top
radio/
climate panel.
6. Extract
(4)
7mm screws securing the radio's
mo-
tor/chassis, unplug all connectors and remove.
2