Alpine KTX-VW8 User Guide - Page 4

Wiring Harness Diagram

Harness

To

Foot

Brake

{+)

at

switch above pedal

BlueNellow

Steering Wheel

Control Wire

To

Head Unit

INE-Z928HD

Audio

Video

· Navigation

System

1. The interface comes pre-programmed

for

all

of

the

vehicles factory SWC functions and does

not

require

programming. The SWC can always be restored

to

default settings

by

pressing and releasing

the

program

button on

the

side

of

the

interface once and waiting 7 seconds

for

the

LED

to

flash 4 times.

2. The LED will flash whenever a user programmable SWC button is pressed.

3.

The SWC will

not

function when

car

is in Accessory mode.

4. When used in

201

0+ Jetta, Passat vehicles equipped with a Multi Function Display (MFD): The au-

dio

screen will display

the

SWC functions as they are pressed on

the

steering wheel. It will also display

"Programming Mode" whenever

the

programming button on

the

side

of

the interface is pressed. The Blue/

White remote input wire must be hooked up and the MFD must be in audio mode

for

these features

to

be

displayed.

5. When used in 2006-2009 Jetta, Passat vehicles equipped with a MFD: The

up

&

down arrows on

the

SWC

that

also control

the

MFD come programmed with functions

but

the

SWC will control

both

the

radio and

the

MFD. These buttons can be removed

by

reprogramming the interface and

not

programming these buttons.

6.

In vehicles equipped with factory Bluetooth, the telematics module must be disconnected in order

to

use

the

Phone & Voice buttons.

Not

disconnecting the telematics module will result in

the

MFD switching

to

phone mode every

time

the

Phone

or

Voice buttons are pressed.The telematics module can usually be

found under

the

passenger seat.

,

7. The RAP feature is

not

available in

201

0+ vehicles equipped with a premium amplified system.

Liability Disclaimer

Due

to

changes in design and manufacturing that may

occur

with your specific vehicle,

it

is important that you do not rely solely on vehicle information contained in this installation

manual, such as dash disassembly, wire harness, and codes. Such information should be

confirmed with the vehicle manufacturer. Alpine Electronics, Inc. and its affiliated companies

is not responsible for damage that may occur to you

or

your automobile during the installation

of

the Perfect Fit Kit.

If

you have any further questions, feel free to contact Alpine Tech Support at 1-800-NAV-HELP.

ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, CA 90501, U.S.A

ALPINE ELECTRONICS OF CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9,

Canada

Do

not

send products to these addresses.

Call the toll free number

or

visit the website to locate a service center.

Alpine KTX-VW8 User Guide - Page 4

Wiring Harness Diagram, Liability Disclaimer

Page 4 highlights