Alpine MC20 Operating Instructions - Page 6

MC2 Add-on Commander Pairing Procedure 1. Power on existing MC20 system 2. Connect power and ground wires of MC2 add-on commander (see Installation) 3. MC2 add-on commander display will turn on and automatically go to the pairing screen in the program menu with ADD MC2 showing on the display 4. On marine radio, select FM Tuner as source (make sure that tuner seek mode is OX or LOCAL, not MANUAL) 5. Found Radio will appear on the display below ADD MC2 when add-on commander is ready to pair with MC20 system * 6. On marine radio, press SEEK UP ( ~ ) once 7. PRESS ENTER will appear below ADD MC2 on the dispray 8. Press ENT to finish pairing operation and save new settings 9. Press ESC to exit Program Menu 10. Turn off the existing MC20 system, then turn it back on. Pairing procedure is now completed. *If Found Radio does not appear on the display, MC2 location may be out of MC20 system range (typical - 40 feet/12 m) 6