Alpine MRV-M1200 Owner s Manual english

Alpine MRV-M1200 Manual

Get Alpine MRV-M1200 PDF manuals and user guides View all Alpine MRV-M1200 manuals
Add to My Manuals
Save this manual to your list of manuals

Alpine MRV-M1200 manual content summary:

  • Alpine MRV-M1200 | Owner s Manual english - Page 1
    /PARA USO EN AUTOMÓVILES EN MRV-M1200 FR MONO POWER AMPLIFIER ES • OWNER'S MANUAL Please read before using this equipment. • MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. • MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. ALPINE ELECTRONICS MARKETING, INC. 1-7, Yukigaya
  • Alpine MRV-M1200 | Owner s Manual english - Page 2
  • Alpine MRV-M1200 | Owner s Manual english - Page 3
    DIAGRAMS 11 SPECIFICATIONS 14 WARNING Points to Observe for Safe Usage Read this manual carefully before using the system components. They contain instructions on how to use this product in a safe and effective manner. Alpine cannot be responsible for problems etc. BEFORE WIRING, DISCONNECT THE
  • Alpine MRV-M1200 | Owner s Manual english - Page 4
    instructions. Failure to heed them can result in injury or property damages. HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing. HAVE THE WIRING
  • Alpine MRV-M1200 | Owner s Manual english - Page 5
    3. Drill the screw holes. 4. Position the MRV-M1200 over the screw holes, and secure with four self-tapping screws. Self-Tapping Screws (M4 × 20) Holes Self-Tapping Screws (M4 × 12) CAUTION DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Cables or wiring that obstruct or hang up on
  • Alpine MRV-M1200 | Owner s Manual english - Page 6
    power off to all audio components. Connect the battery lead from the amp directly to the positive (+) terminal of the vehicle's battery with appropriate unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information. • Your Alpine dealer knows best about
  • Alpine MRV-M1200 | Owner s Manual english - Page 7
    short circuit. See below for appropriate fuse value and minimum wire gauge requirement: • 100 amp fuse, 4 AWG/21 mm2 Ground Lead (Sold Separately) Input connectors, you should connect these wires to the speaker output leads of your head unit. The MRV-M1200 accepts input from high power or standard
  • Alpine MRV-M1200 | Owner s Manual english - Page 8
    line level output. This is an ideal output for driving a second subwoofer amp. This output is full-range, and is not affected by the crossover. connection to battery and ground (depends upon wire length necessary): 2 AWG (33 mm2) or 1/0 AWG (53 mm2) MRV-M1200 BATTERY GROUND 1 m (Max.) 4 AWG
  • Alpine MRV-M1200 | Owner s Manual english - Page 9
    about 7 - 10 mm (9/32" - 13/32"). 7 - 10 mm (9/32" - 13/32") Lead end side of the product Twist the tip of wire leads NOTES: • If length of the exposed wire is too short, a poor connection may occur causing operation failure or sound interruption. • On the other hand, if the length is too
  • Alpine MRV-M1200 | Owner s Manual english - Page 10
    off ) the MRV-M1200. Therefore, the switch should be mounted so that is accessible by the driver. Make sure the switch is turned off when the vehicle is not running. Otherwise, the amplifier will remain on and drain the battery. Blue/White Power Antenna Remote Turn-On Lead To other Alpine component
  • Alpine MRV-M1200 | Owner s Manual english - Page 11
    each Selector Switch, turn off the power and insert a small screwdriver, etc., perpendicularly to the Switch. Input Gain Adjustment Control Set the MRV-M1200 input gain to the minimum position. Using a dynamic CD as a source, increase the head unit volume until the output distorts. Then, reduce
  • Alpine MRV-M1200 | Owner s Manual english - Page 12
    About Power Indicator Power Indicator Lights up when power is on. Is off when power is off. Indication color Blue Red (blinking) Red Status Amplifier circuit is normal. Operating temperature is high. Amplifier circuit is abnormal. An electrical short has occurred, or supply current is too high.
  • Alpine MRV-M1200 | Owner s Manual english - Page 13
    SYSTEM DIAGRAMS When you connect one or multiple subwoofers, please take care to configure the correct total impedance before connecting to subwoofer(s) to the amplifier. Subwoofer Head
  • Alpine MRV-M1200 | Owner s Manual english - Page 14
    2 Subwoofer System (MONO) Connecting to the Speaker Level Input System White White/Black Gray Gray/Black Gray/Black Gray White/Black White Violet/Black Violet Green/Black Green Green Green/Black Violet Violet/Black 12-EN
  • Alpine MRV-M1200 | Owner s Manual english - Page 15
    one channel input is used. The Y-adapter is not required if a stereo/mono pair line output is used to drive both inputs of the bridged amp. Proper connection Improper connection One signal One signal 13-EN
  • Alpine MRV-M1200 | Owner s Manual english - Page 16
    (fc=50 Hz) Linear Attenuation CH-1/2 Input Pass-through, Buffered Width Height Depth NOTE: • Specifications and design are subject to change without notice. MRV-M1200 600 W RMS x 1 1,200 W RMS x 1 - ≤1% ≤1% ≤1% ≤1% >85 dB >107 dB 10 Hz - 400 Hz >750 0.15 - 4.0 V 50 Hz - 400 Hz (-24 dB/oct.) 0 to
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
EN
FR
ES
FOR CAR USE ONLY/POUR APPLICATION AUTOMOBILE/PARA USO EN AUTOMÓVILES
•
OWNER’S MANUAL
Please read before using this equipment.
•
MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
•
MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC.
1-7, Yukigaya-Otsukamachi, Ota-ku,
Tokyo 145-0067, JAPAN
Phone: 03-5499-4531
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ELECTRONICS GmbH
Wilhelm-Wagenfeld-Str. 1-3,
80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
www.alpine.co.uk
ALPINE ELECTRONICS France S.A.R.L.
184 allée des Erables
CS 52016 – Villepinte
95 945 Roissy CDG cedex
FRANCE
Phone : + 33(0)1 48 63 89 89
ALPINE ITALIA S.p.A.
Viale Cristoforo Colombo, 8
20090 Trezzano sul Naviglio MI, Italy
Phone +39 02 484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
MRV-M1200
MONO POWER AMPLIFIER
JEIL Moon Hwa Co.
18-6, 3Ga, Pil_dong, Jung_gu, Seoul, Korea
Designed by ALPINE Japan
Printed in Korea
68-29530Z91-A (Y-A5)
M3514596010