Alpine MRV-M1200 Owner s Manual english - Page 6
Connections - amp
View all Alpine MRV-M1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
CONNECTIONS Be sure to add an in-line fuse with the battery lead as close as possible to the battery's positive (+) terminal. Before making connections, be sure to turn the power off to all audio components. Connect the battery lead from the amp directly to the positive (+) terminal of the vehicle's battery with appropriate in-line vehicle's fuse (see Battery Lead section). Do not connect this lead to the vehicle's fuse block. To prevent external noise from entering the audio system • Locate the unit and route the leads at least 10 cm (4") away from the vehicle's harness. • Keep the battery power leads as far away from other leads as possible. • Connect the ground lead securely to a bare metal spot (remove any paint or grease if necessary) of the vehicle's chassis. • If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information. • Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information. 4-EN