Alpine PSS-20WRA Owners Manual - Page 17

UNLIMITED Jeep Wrangler ˜ 17/20 PSS-20WRA Wiring Diagram For Alpine Restyle Headunit To Vehicle Connectors To OBDII Connector OEM Audio Power/Speaker 20-pin Gray Connector 16-pin Green Connector Alpine Restyle Headunit Recommended Sound Settings Front 63Hz Level +5 Medium 140Hz Level +6 Medium 200Hz Level -8 Medium 450Hz Level -1 Narrow 560Hz Level -10 Narrow 1.1kHz Level -04 Medium 4kHz Level +2 Medium 8kHz Level +2 Wide 16kHz Level +2 Wide Rear 56Hz Level +5 Wide 80Hz Level +8 Wide 200Hz Level -10 Medium 500Hz Level -2 Narrow 800Hz Level +3 Medium 1.8kHz Level +5 Medium 3.6kHz Level +4 Wide 8kHz Level +2 Wide 11kHz Level +3 Narrow X-Over Front 63Hz Slope 18db Level -2 63Hz Slope 18db Level -4 125Hz Slope 12db Level 0 Time Correction FL 1.2 FR 0 RL 2.4 RR 0.7 SL 0.8 SR 0.8 4 PIN WHITE CONNECTOR Front Front Rear Rear Front 4 PIN BLACK CONNECTOR NOT USED Rear LR LR Front Rear L R Connect to Alpine Restyle headunit low level output Subwoofer WHITE/GRAY RCA Adapter GREEN/PURPLE RCA Adapter RED/WHITE RCA Adapter Front Rear Subwoofer iDatalink MAESTRO Module Blue/White Amp Turn-on Blue Amp Turn-On RED/WHITE L R RCA Adapter For a detailed Alpine Restyle headunit wiring diagram refer to it's corresponding installation manual. BLACK To Chassis Ground RED To Battery Cable MRV-F300 Amplifier Speaker Wiring CH 1 - White (+) White/Black (-) CH 2 - Gray(+) Gray/Black (-) CH 3 - Green (+) Green/Black (-) CH 4 - Purple (+) Purple/Black (-) To Speaker Output RED BATTERY BLACK GROUND BLUE REMOTE To Vehicle's Battery POSITIVE (+) Terminal POWER AMPLIFIER MRV-F300 Hi/Lo L R L R Adapter Input Signal CH 1 - White (L) CH 2 - Gray (R) CH 3 - Green (L) CH 4 - Purple (R) SUBWOOFER PWE-S8 NOTE: FOR BEST PERFORMANCE SET AMPLIFIER AND SUBWOOFER TO RECOMMENDED SETTINGS AS SHOWN ABOVE