Alpine PSS-23WRA Owners Manual - Page 4
Factory Equipment Removal Process
 |
View all Alpine PSS-23WRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
UNLIMITED JL Jeep Wrangler ˜ 4/11 Factory Equipment Removal Process 1 Use a panel removal tool to release (2) clips on the top of the plastic knee cover and remove it. 2 Use a panel removal tool to release (10) clips on the HVAC control panel, disconnect and remove it. 3 Extract (2) 7mm/Phillips screws on the bottom of the radio bezel. 4 Use a panel removal tool to release (6) clips on the radio bezel and remove it. 5 Extract (4) 7mm/Phillips screws from the factory radio, disconnect and remove it. 6 Lift the middle tab on the passenger side glovebox to release and remove it.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
 |
 |
Jeep Wrangler
UNLIMITED JL
±
4/11
1
Use a panel removal tool to release (2) clips on the
top of the plastic knee cover and remove it.
3
Extract (2) 7mm/Phillips screws on the bottom of
the radio bezel.
5
Extract (4) 7mm/Phillips screws from the factory
radio, disconnect and remove it.
2
Use a panel removal tool to release (10) clips on the
HVAC control panel, disconnect and remove it.
4
Use a panel removal tool to release (6) clips on the
radio bezel and remove it.
6
Lift the middle tab on the passenger side glovebox
to release and remove it.
Factory Equipment Removal Process