Alpine PSS-SX01 Installation Manual - Page 5

Mounting The Speaker Pod Exploded View

Get Alpine PSS-SX01 PDF manuals and user guides View all Alpine PSS-SX01 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

Mounting The Speaker Pod Exploded View Powersports PSS-SX01 v20200724 ˜ 5/9 Remove 19mm bolt with socket or wrench. This will allow the clamp to slide back. Make sure the lock washer and washer go below the bolt in this order when tightening. Use the spacer for tubing that is 1.5'' to 1.75''. Do not use spacer if you have 2" tubing. Plug in 90 degree speaker terminal here. Attach the (2) front logo's based on the orientation the pod is mounted. Attach the rear logo based on the orientation the pod is mounted.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
Powersports
PSS-SX01
v20200724
±
5/9
Mounting The Speaker Pod Exploded View
Remove 19mm bolt with socket
or wrench. This will allow the clamp to slide back.
Make sure the lock washer and washer go below
the bolt in this order when tightening.
Use the spacer for tubing that is 1.5’’ to 1.75’’.
Do not use spacer if you have 2” tubing.
Attach the (2) front logo’s
based on the orientation the
pod is mounted.
Attach the rear logo
based on the orientation the
pod is mounted.
Plug in 90 degree speaker
terminal here.