Alpine TMI-M990 Owners Manual - Page 61
Alpine TMI-M990 - LCD Monitor Manual
View all Alpine TMI-M990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
1 IONBUS cable Used when setting up IONBUS compatible products. w Remote Control Output Lead (White/ Brown) Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control. 2 IONBUS terminal Used when setting up IONBUS compatible products. 3 IONBUS cable (Included) 4 Power Supply Connector (Included) 5 Reverse Lead (Orange/White) Use only when a back-up camera is connected. Connect to the plus side of the car's reverse lamp that lights when the transmission is shifted into reverse (R). Switches the video picture to the back-up camera. This is linked with putting the car into reverse (R). e Remote Control Input Lead (White/ Brown) Connect the external Alpine product to the remote control output lead. r Monitor Extension Cable (Included) t Display Output Terminal y RGB Input Terminal u S Video Input Terminal i AUX Input Terminals/AUX Output Terminals o System Switch Change to "1:SYSTEM" when the TMIM990 is connected with an IONBUS compatible head unit. When not connected to an IONBUS compatible head unit, change to "2:STANDALONE". 6 Parking Brake Lead (Yellow/Blue) Connect this lead to the power supply side of the parking brake switch to transmit the parking brake status signals to the TMI-M990. 7 Foot Brake Lead (Yellow/Black) Connect to the vehicle's foot brake lead or brake lamp lead. 8 Switched Power Lead (Ignition) (Red) Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position. When connecting with the IONBUS compatible head unit, do not connect the ignition lead. • Be sure to turn the power off to the unit before changing the switch position. 9 Battery Lead (Yellow) Connect this lead to the positive (+) post of the vehicle's battery. p Choke Coil with Fuse Holder (7.5A) q Ground Lead (Black) Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. 57-EN