Alpine X009-GM Owner's Manual (english) - Page 43
Setup, Setup Operation, General Setup, General Setup Operation, iDataLink Setup
View all Alpine X009-GM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Setup Setup Operation Touch the [SETUP] icon on the Audio/Visual Playback screen to display the Setup main screen. [SETUP] icon 2 Touch [General]. The General Setup screen appears. 3 Select the desired item. General Setup General Setup Operation To display the General Setup Menu screen: Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Keep pushing the foot brake and release the parking brake once then engage it again. 3 When the parking brake is engaged for the second time, release the foot brake. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the General mode operation has been released. Engaging the parking brake can reactivate the General Setup Menu, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of "To display the General mode screen." Each time the ignition is turned OFF, perform the procedure of "To display the General mode screen." The following steps 1 to 5 are common operations to each "Setting item" of General Setup. Refer to each section for details. 1 Touch [Setup] icon of Top banner. The Setup main screen is displayed. Setting items: iDataLink Setup / Text Display / Remote Sensor *1 / Top/Bottom Banner Fade Out / Screen/ LED Customize / Visual / About / Installation / External Audio Processor / Optical *2 *1 Displayed only when Rear Seat Entertainment (RSE) is On (page 60). *2 Available only when External Audio Processor is On. • Depending on the item, repeat step 3. 4 Touch [ ] or [ ] etc., to change its setting. • When the pop-up window for setup is displayed, touch [ ] to close the window after setting. 5 Touch [ ] to return to the previous screen. • Immediately after changing the settings of General Setup (While the system is writing data automatically) do not turn the ignition key to OFF. Otherwise, the settings may not be changed. iDataLink Setup [iDataLink Setup] is selected on the General setup menu in step 3. Refer to "General Setup Operation" (page 43). Setting the Source Category You can set whether the following source button in the top banner is available. Setting item: USB/iPod / SiriusXM / Bluetooth Audio Setting contents: Both (Initial setting) / OEM / Aftermarket Both: Both the sources listed above from this unit and iDataLink module are available. OEM: Only the source listed above from iDataLink module is available. The source from iDataLink module is marked with . Aftermarket: Only the source listed above from this unit is available. 43-EN