Alpine X109-WRA Installation Manual english - Page 15

Set Up Guide, Troubleshooting Guide

Get Alpine X109-WRA PDF manuals and user guides View all Alpine X109-WRA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

WRANGLER Jeep Wrangler ˜ 15/15 Set Up Guide 1 Turn the vehicle's Ignition switch to ACC. 2 Turn ON the X109-WRA by pressing any key. 3 Select the user language and press OK. 4 Press and release the parking brake twice. 5 If a camera is present, turn it ON in the system menu. (MENU/SETUP/SYSTEM/CAMERA/CAMERA SELECT) 6 AUDIO MUTE ON REVERSE- By default, when the vehicle is shifted into reverse the AUDIO will MUTE. If this feature is not desired turn it off in the AUDIO MENU (MENU/SETUP/SOUND/MUTE WHILE BACKING UP) 7 Set the DVD player. (MENU/SETUP/SOURCE/HDMI). 8 When the KCX-630HD (HDMI SELECTOR) is present be sure to turn it ON in the SETUP MENU. (MENU/ SYSTEM/EXTERNAL ACCESSORIES/HDMI SELECTOR) 9 When the KAC-001 (External Accessory Control Module) is present be sure to turn it ON in the SETUP MENU. (MENU/SYSTEM/EXTERNAL ACCESSORIES/EXTERNAL ACCESSORY CTLR) 10 Vehicle information- Set the desired gauge information. (MENU/VEHICLE INFO/GAUGES/CAR SETTINGS) Troubleshooting Guide Symptom Possible Cause Remedy 1 iDatalink website says Serial number may not be in serial number is invalid. iDatalink database. Call ADS at 1-866-427-2999 and verify. Incorrect serial number was used Flash Maestro with correct serial when flashing maestro. number. 2 Headunit will not turn on. 4 pin Maestro data cable is disconnected or damaged. Check for proper connection or disconnected pins. Monitor, key-harness or main harness are not connected. Check for proper connection or disconnected pins. 3 Cannot enter SETTINGS Vehicle is in motion or parking MENU. brake is not engaged. With vehicle on (P)PARK, engage the parking brake, release the parking brake and engage the parking brake a second time. DVD has not been set on the Ensure DVD is ON in HDMI SETUP SETUP menu. menu. 4 Cannot control the DVD Player properly. HDMI box has not been set on the SETUP menu. Ensure DVD is ON in HDMI SETUP menu and remote loop was cut on the wire harness. 5 Sound mutes when vehicle is shift to reverse. Mute on reverse is turned on in the SOUND menu. Select Mute on reverse off. 6 On Nav screen the vehicle is out of place. Poor GPS signal. Ensure the recommended GPS antenna route was used. See page 6.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
Jeep Wrangler
WRANGLER
±
15/15
Set Up Guide
1
Turn the vehicle’s Ignition switch to ACC.
2
Turn ON the X109-WRA by pressing any key.
3
Select the user language and press OK.
4
Press and release the parking brake twice.
5
If a camera is present, turn it ON in the system menu. (MENU/SETUP/SYSTEM/CAMERA/CAMERA SELECT)
6
AUDIO MUTE ON REVERSE- By default, when the vehicle is shifted into reverse the AUDIO will MUTE. If this
feature is not desired turn it off in the AUDIO MENU (MENU/SETUP/SOUND/MUTE WHILE BACKING UP)
7
Set the DVD player. (MENU/SETUP/SOURCE/HDMI).
8
When the KCX-630HD (HDMI SELECTOR) is present be sure to turn it ON in the SETUP MENU. (MENU/
SYSTEM/EXTERNAL ACCESSORIES/HDMI SELECTOR)
9
When the KAC-001 (External Accessory Control Module) is present be sure to turn it ON in the SETUP MENU.
(MENU/SYSTEM/EXTERNAL ACCESSORIES/EXTERNAL ACCESSORY CTLR)
10
Vehicle information- Set the desired gauge information. (MENU/VEHICLE INFO/GAUGES/CAR SETTINGS)
Troubleshooting Guide
Symptom
Possible Cause
Remedy
1
iDatalink website says
serial number is invalid.
Serial number may not be in
iDatalink database.
Call ADS at 1-866-427-2999 and
verify.
2
Headunit will not turn on.
Incorrect serial number was used
when flashing maestro.
Flash Maestro with correct serial
number.
4 pin Maestro data cable is
disconnected or damaged.
Check for proper connection or
disconnected pins.
Monitor, key-harness or main
harness are not connected.
Check for proper connection or
disconnected pins.
3
Cannot enter SETTINGS
MENU.
Vehicle is in motion or parking
brake is not engaged.
With vehicle on (P)PARK, engage
the parking brake, release the
parking brake and engage the
parking brake a second time.
4
Cannot control the DVD
Player properly.
DVD has not been set on the
SETUP menu.
Ensure DVD is ON in HDMI SETUP
menu.
HDMI box has not been set on the
SETUP menu.
Ensure DVD is ON in HDMI SETUP
menu and remote loop was cut on
the wire harness.
5
Sound mutes when
vehicle is shift to reverse.
Mute on reverse is turned on in the
SOUND menu.
Select Mute on reverse off.
6
On Nav screen the
vehicle is out of place.
Poor GPS signal.
Ensure the recommended GPS
antenna route was used. See page
6.