Alpine X409-WRA-JK Owners Manual English - Page 72

Playing a Disc WARNING It is dangerous for the driver to watch the DVD while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur. Install the unit correctly so that the driver cannot watch DVD unless the vehicle is stopped and the emergency brake is applied. If the unit is not installed correctly, the driver will be able to watch DVDs while driving the vehicle and may be distracted and could cause an accident. The driver or other people could be severely injured. CAUTION • Not all functions will operate for every DVD. See the individual DVD's instructions for details on the features supported. • Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary. • If you switch the power or Ignition key OFF or change sources during playback, playback will continue where you left off when you resume playback. • If you try to perform an invalid operation (based on the type of disc being played), the following mark is displayed on the monitor screen: • Play Position Memory Function Even if you turn power off or switch the Ignition key to OFF during playback or change the source, playback will continue from the point where playback stopped when the power is turned ON again. 1 Press the (AUDIO) button to select DVD (CD) mode. The display shows the DVD (CD) mode screen. When a disc is inserted into the disc slot of the DVD Player, with the label side facing up, the unit starts playback of the disc. • The reverse side of a double-sided DVD will not be played automatically. Remove the disc, turn it over, and reinsert it. • DO NOT insert discs containing maps for the navigation system. Doing so could result in damage. • For your safety, video is not displayed and only audio can be heard while driving. If a Menu Screen Appears On DVD mode, menu screens may appear automatically. If this happens, perform the operation described below to start playback. Direct Menu Operations 1 Touch the screen while the DVD menu is being displayed. Directly touch operation switches displayed on the screen to operate. • To display the operation screen, touch [Control]. 2 Touch the DVD menu directly. • Some operations cannot be performed depending on the disc. Menu Operations 1 Touch [ ] (Menu Control). The menu operation mode will be displayed. • You cannot operate them while driving. 2 Touch [Key]. The Key panel is displayed. Touch [Return] to return to the previous display. 3 Select a desired menu item by touching [ ], [ [ ]. ], [ ] or • Touch [ ] or [ ] to change the Key panel location from right to left or vice-versa. • Touching [ ] in the operation panel returns to the screen in step 1. • Touching [Key] displays the numeric keypad input mode screen. For details of the numeric keypad input mode screen, see "Numeric Keypad Input Operations" (page 73). 4 Touch [Enter] to confirm the selected item. 72-EN