Alpine i109-WRA Owners Manual - Page 11

Listening to the Radio 1 Press the HOME button. The Home screen is displayed. 2 Touch [Radio]. The radio mode is activated and the display changes to the Radio mode screen. 3 Touch [ ] to select the desired radio band. Each touch changes the bands as follows: FM-1 FM-2 AM FM-1 4 Touch [Tune] to select the tuning mode. DX Seek Local Seek Manual Presetting Stations Automatically The tuner can automatically seek and store 6 strong stations in the selected band in order of signal strength. After selecting the desired band, touch and hold [A.Memo] for at least 2 seconds. The tuner automatically seeks and stores 6 strong stations into the preset buttons in order of signal strength. When automatic storing has completed, the station stored in the preset 1 is selected. • If no stations are stored, the tuner will return to the original station you were listening to before the automatic storing procedure began. • You can cancel this process by touching [A.Memo] while the tuner is automatically seeking stations. After canceling, the tuner preset will return to the previous setting. • There are two modes you can select for auto tuning, DX and Local: - DX (Distance) mode; Both strong and weak stations will be tuned in. - Local mode; Only strong stations will be tuned in. The initial setting is DX. • If "Preset" or "PTY" appears, touch [Tune] repeatedly until a tuning mode is displayed. 5 Touch [ ], [ ] or [ ], [ ] to change the radio frequency up or down respectively. In manual mode, touch and hold to change the frequency continuously. Presetting Stations Manually 1 Tune in a desired radio station you wish to store in the preset memory by manual or automatic seek tuning. 2 Touch and hold any one of the preset buttons for at least 2 seconds. The selected station is stored. 3 Repeat the procedure to store up to 5 other stations onto the same band. To use this procedure for other bands, simply select the desired band and repeat the procedure. A total of 18 stations can be stored in the preset memory (6 stations for each band; FM-1, FM-2 or AM). • If a preset memory has already been set in the same preset number, it will be cleared and the new station will be memorized. Tuning to Preset Stations Select the desired preset in any band to tune to the station stored in that preset number. 1 Touch [ ] repeatedly until the desired band is displayed. 2 Touch any one of the preset buttons that has a station stored to it. The preset station is received. PTY (Program Type) Tuning (RBDS mode only) 1 Touch [PTY Search]. The Select PTY list screen is displayed. 2 Touch the selected program type to start searching for a station of that type. If no PTY station is found, "No PTY." will be displayed. 3 To select the station in PTY, touch [Tune] repeatedly during reception of a PTY station to display "PTY." And then, touch [ ], [ ]. Displaying Radio Text (RBDS mode only) Text messages from a radio station can be displayed. 1 Tune in a radio station that transmits text messages. 2 Touch the Info area ( ) (page 10) in FM radio mode repeatedly to switch to the desired display. Song Info Mode (PTY/Title Name/Artist Name/Album Name) Radio Text Mode (Radio Text) 11-EN