Alpine i207-WRA Instruction Manual - Page 16
Set Up Guide, Troubleshooting Guide
View all Alpine i207-WRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
WRANGLER Jeep Wrangler 16/16 Set Up Guide 1 Turn the vehicle's Ignition switch to ACC. 2 Turn ON the i207-WRA by pressing any key. 3 Select the user language and press OK. 4 With the vehicle parked, engage the parking brake, release the parking brake and engage the parking brake again. 5 If a camera is present, turn it ON in the system menu. (MENU/SETUP/SYSTEM/CAMERA/CAMERA SELECT) 6 AUDIO MUTE ON REVERSE- By default, when the vehicle is shifted into reverse the AUDIO will MUTE. If this feature is not desired turn it off in the AUDIO MENU (MENU/SETUP/SOUND/MUTE WHILE BACKING UP) 7 When the KCX-630HD (HDMI SELECTOR) is present be sure to turn it ON in the SETUP MENU. (MENU/ SYSTEM/EXTERNAL ACCESSORIES/HDMI SELECTOR) 8 Set the DVD player (if optional DVD player is installed). (MENU/SETUP/SOURCE/HDMI). 9 When the KAC-001 (External Accessory Control Module) is present be sure to turn it ON in the SETUP MENU. (MENU/SYSTEM/EXTERNAL ACCESSORIES/EXTERNAL ACCESSORY CTRL) 10 Vehicle information- Set the desired gauge information. (MENU/VEHICLE INFO/GAUGES/CAR SETTINGS) Troubleshooting Guide Symptom Possible Cause Remedy 1 iDatalink website says serial Serial number may not be in iDatalink number is invalid. database. Call ADS at 1-866-427-2999 and verify. Incorrect serial number was used when flashing maestro. Flash Maestro with correct serial number. 2 Headunit will not turn on. 4 pin Maestro data cable is disconnected or damaged. Check for proper connection or disconnected pins. Harness is unplugged. Verify every connection from the installation connections diagram. With vehicle on (P)PARK, engage the 3 Cannot enter SETTINGS MENU. Vehicle is in motion or parking brake is parking brake, release the parking not engaged. brake, and engage the parking brake a second time. 4 No output from RCA's Maestro module is flashed for amplified system. Re-flash module for non-amplified system. GPS antenna is obstructed and 5 CarPlay/ Android Auto map positioning issues GPS antenna is positioned incorrectly. doesn't have line of sight to the sky. Perform a factory reset. The unit will automatically recalibrate. Loose or disconnected USB cable. Check the USB connection behind the headunit. iPhone or Android phone is 6 not recognized when connected to the Non-compatible cable. USB cable. Use the cable supplied with the iPhone or Android phone. Third party adapters and long extensions may not work. Only use USB extension that came with the head unit. Dirty charging port on phone. Clean charging port.