Alpine i407-WRA-JK Installation Manual - Page 17
Set Up Guide, Troubleshooting Guide
![]() |
View all Alpine i407-WRA-JK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Set Up Guide Jeep Wrangler i407-WRA-JK 20210811v1 17/18 1 Turn the vehicle's Ignition switch to ACC. 2 Turn ON the i407-WRA-JK by pressing any key. 3 With the vehicle parked, engage the parking brake, release the parking brake and engage the parking brake again. 4 If a rear camera is present, turn it ON in the settings menu. (HOME/SETTINGS/CAMERA/REAR CAMERA/ CAMERA SELECT/REAR/OK). 5 If a front camera is present, turn it ON in the settings menu. (HOME/SETTINGS/CAMERA/FRONT CAMERA/ CAMERA SELECT/FRONT/OK). 6 If the AUX Input is being use be sure to turn it ON in the settings. (HOME/SETTINGS/GENERAL/AUX/AUX SELECT). 7 Vehicle information- Set the desired gauge information. (HOME/SETTINGS/GENERAL/IDATALINK). Detailed descriptions of the settings can be found in the owners manual which can be downloaded from the support page of the website. Troubleshooting Guide Symptom 1 iPhone not working with HDMI. Possible Cause Not using Apple HDMI to Lightning adapter. Didn't plug USB power into a 2A source. Using incorrect HDMI adapter. Remedy Purchase the HDMI to Lightning adapter directly from Apple. Not all 3rd party adapters work the same. Do not plug into the USB from the Alpine head unit. A third party USB adapter will need to be used that is 2A. If the phone has the feature to use an HDMI adapter it must be the one purchased from the manufacturer of the phone, not a third party adapter. 2 Android phone is not working with HDMI. Miracast adapter isn't plugged into a 2A source. Do not plug into the USB from the Alpine head unit. A third party USB adapter will need to be used that is 2A. Miracast adapter has resolution settings that are too high. Plug the adapter into another monitor (for example a television in the home) and reduce the resolution settings. Incorrect serial number is being 3 iDatalink website says serial number is invalid. used. Serial number may not be in iDatalink database. In the i407-WRA settings confirm the serial number. HOME/SETTINGS/GENERAL/ ABOUT/VERSION INFORMATION. Call ADS at 1-866-427-2999 and verify. 4 No output from RCA's Maestro module is flashed for amplified system. Re-flash module for non-amplified system. Navigation voices and/or 5 Bluetooth audio can't be heard. The vehicle has an OEM amplifier and the warning on page 11 was not followed. Swap the front and rear speaker connectors as shown on page 11. Maestro module was not flashed. Flash the maestro module as shown on page 5. Steering wheel controls aren't 6 working. Vehicle data isn't Every harness needs to be plugged into it's displaying. Connection was not made properly. proper place. Follow page 11 and ensure every connection is going exactly where it needs to be.
![](/manual_guide/products/alpine-i407wrajk-installation-manual-4042ab2/17.png)