Alpine i407-WRA-JL Installation Manual - Page 9
Installation Instructions
View all Alpine i407-WRA-JL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Jeep Wrangler i407-WRA-JL 20210330v1 9/22 Installation Instructions 1 Mount the microphone next to the rear view mirror and run the cable behind the factory panels. Route as shown on the diagram on page 12. 2 Run the Bluetooth microphone cable down the A pillar along the OEM wiring. Route as shown on the diagram on page 12. 3 Route vehicle cable in main harness from radio cavity to glove box and connect it to OBDII gateway behind the glove box. If the gateway is fully occupied, unclip 1 connector from it and use T-harness. 4 At radio cavity, connect the main harness, white FM adapter, and green SiriusXM antenna, and other adapters to factory harness and secure them.
Jeep Wrangler
i407-WRA-JL
20210330v1
±
9/22
Installation Instructions
1
Mount the microphone next to the rear view mirror
and run the cable behind the factory panels. Route
as shown on the diagram on page 12.
3
Route vehicle cable in main harness from radio
cavity to glove box and connect it to OBDII
gateway behind the glove box. If the gateway is
fully occupied, unclip 1 connector from it and use
T-harness.
4
At radio cavity, connect the main harness, white FM
adapter, and green SiriusXM antenna, and other
adapters to factory harness and secure them.
2
Run the Bluetooth microphone cable down the A
pillar along the OEM wiring. Route as shown on the
diagram on page 12.