Alpine iLX-F309 Owners Manual English - Page 28

2 Touch [ ] (Audio), [ ] (Hands-free) or [ ] (Both) of the device you want to connect from the list. Audio: Device is used as an Audio device. Hands-free: Device is used as a Hands Free Device. Both: Device is used as both an Audio device and Hands Free Device. • You can register up to 5 Bluetooth compatible mobile phones. • You can connect three Bluetooth Devices; two exclusively for Hands-Free Phone and one exclusively for Bluetooth Audio. • When you register a Hands-Free Phone for the first time, Primary is set automatically. When you connect two Hands-Free Phones, select "Hands-free" or "Both." You can then set the priority on the Primary/Secondary setting screen. For details, see "Hands-free Device Primary/Secondary Setting" (page 28). 3 When the device registration is complete, a message appears and the device returns to normal mode. • The Bluetooth registration process differs depending on the device version and SSP (Simple Secure Pairing). If a 4 or 6 character Passcode appears on this device, enter the Passcode using the Bluetooth compatible device. If a 6 character Passkey appears on this device, make sure the same passkey is displayed on the Bluetooth compatible device and touch "Yes." • If all 5 devices have been registered, you cannot register a 6th device. To register another device, you need to delete one of the other 5 devices first. Setting the Bluetooth Device Select one of 5 paired Bluetooth compatible devices that you previously registered. Touch [ ] (Audio) or [ ] (Hands free) of the device you want to connect from the Paired Device list. Hands-free Device Primary/Secondary Setting Make sure the "Bluetooth" setting is "On" ( ). See "Bluetooth Setup" (page 27). When you connect two Hands-Free Phones, set the priority of the operation and the setting of incoming-outgoing calls. Setting item: Hands-free Device Priority Setting contents: Primary / Secondary Touch the checkbox for Primary/Secondary of the device names that are registered to the unit to set them. • When connected to two hands-free phones, operating restrictions apply to the hands-free phone registered to Secondary. For details, see "Hands-free Phone Control" (page 67). iPhone Auto Pairing Setting Make sure the "Bluetooth" setting is "On" ( ). See "Bluetooth Setup" (page 27). When an iPhone is connected via USB and it is not on the Registered Device list, it will be paired automatically. Setting item: iPhone Auto Pairing Setting contents: On / Off (Initial setting) On: Performs iPhone Auto Pairing setting. Off: Does not perform iPhone Auto Pairing setting. • This setting supports iPhones with iOS Ver.5.5 or later. • When more than 5 Bluetooth devices are registered, Auto Pairing does not start. Deleting a Bluetooth Device from the list You can delete the information of a previously connected Bluetooth compatible device. 1 Touch [ ] (Delete) of the Bluetooth compatible device to delete from the Paired Device list. 2 Touch [OK]. • Touching [Cancel] will cancel the setting. Device Setup [Device] is selected on the Wireless Setup Menu screen in step 1. See "Wireless (Bluetooth) Setup" (page 27). You can make various settings for a Bluetooth compatible device. Setting the Passcode You can set the code for connecting with a Bluetooth compatible device. Setting item: Passcode Change 1 Enter a 4-digit passcode (old), and then touch [OK]. • The initial number is 0000. 2 Enter a 4-digit passcode (new), and then touch [OK]. 3 Enter the passcode that you entered in step 2 again, and then touch [OK]. 28-EN