Alpine iLX-F309TCM Installation Manual - Page 5
Factory Unit Disassembly Process
 |
View all Alpine iLX-F309TCM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Factory Unit Disassembly Process 1 Use a panel removal tool to release clips of the radio bezel and remove it. iLX-F309TCM Toyota Tacoma ˜ 5/19 2 Use a 10mm socket to extract (4) 10mm screws from the factory radio, disconnect and remove it. 3 Use a panel removal tool remove the driver's side A pillar screw cover. 4 Use a 10mm socket to extract the screw from the A pillar panel cover. 5 Use a panel removal tool to release the clips on the eye wear storage compartment and remove it. 6 Remove the drive's side door sill by carefully lifting it.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
 |
 |
Toyota Tacoma
iLX-F309TCM
±
5/19
Factory Unit Disassembly Process
1
Use a panel removal tool to release clips of the
radio bezel and remove it.
3
Use a panel removal tool remove the driver’s side A
pillar screw cover.
5
Use a panel removal tool to release the clips on the
eye wear storage compartment and remove it.
2
Use a 10mm socket to extract (4) 10mm screws
from the factory radio, disconnect and remove it.
4
Use a 10mm socket to extract the screw from the A
pillar panel cover.
6
Remove the drive’s side door sill by carefully lifting
it.