Antec EA-650 Green Manual - Page 4
Output, Voltage, Load Max. Regulation Ripple & Noise - 12v
View all Antec EA-650 Green manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
TABLE 3: OUTPUT CAPACITY AND REGULATION Output Voltage +3.3V +5V +12V1 +12V2 -12V +5Vsb Load Max. 24A 24A 38A 38A 0.5A 2.5A Regulation ±5% ±5% ±5% ±5% ±10% ±5% Ripple & Noise 50 mV 50 mV 120 mV 120 mV 120 mV 50 mV The continuous maximum total output power shall not exceed 650W. +12V1 and +12V2 DC maximum output power shall not exceed 650W. +3.3V and +5V DC maximum combined output power shall not exceed 140W. INSTALLATION: 1. Install the EA-650 Green PSU into your case with the four screws provided. 2. Connect the 24-pin main your motherboard. If your 20-pin connector, detach on the 24-pin connector. Note: The detachable 4-pin place of a 4-pin +12V 3. Connect the 8-pin or 4-pin the CPU to the appropriate motherboard. If your power connector to motherboard uses a the 4-pin attachment section cannot be used in connector. ATX12V connector for connector on your motherboard has an