Antec EA-650 Green Manual - Page 5

8-pin socket with a cover on some of the openings, we recommend that you remove the cover and use the 8-pin connector. Note: Please also refer to your motherboard user's manual for any special instructions. 4. Connect the PCI-E connector(s) to your graphics card(s), if applicable. PCI-E graphics cards use different amounts of power. For some, a single 6-pin connector is sufficient, while more powerful cards use multiple connectors, including the advanced 8-pin PCI-E connector. The 8-pin PCI-E connectors on the EA-650 Green can be used as either 6- or 8-pin connectors. 5. Connect all Molex/SATA connector(s) to your hard drives, optical drives (CD/DVD/BluRay™) and other accessories. Please note that some devices will use either the older 4-pin Molex connectors, while others will use the newer 15-pin SATA connector. 4-pin Molex connectors have two black wires, a yellow, and a red. The SATA connector has an additional orange power wire. 6. Connect your floppy drive (if present) using the supplied FDD connector shown in Table 2. 7. Connect an AC power cord to the power supply AC inlet. To reduce waste, the EA-650 Green does not come with a power cord. Turn the switch to the "|" position after you have connected all the devices and are ready to turn on your computer.