Antec Three Hundred Two Manual - Page 14
Expansion Slot Device Installation
 |
View all Antec Three Hundred Two manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2.10 Expansion Slot Device Installation When installing graphics cards or other expansion cards, you must first remove the rear place covering the expansion slots. 1. With the rear of the case facing you, remove the 2 screws shown to remove the plate. 2. Install your expansion cards according to the manufacturer's instructions. 3. Repalce the plate and screws. Remove these screws prior to expansion card installation 14
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20
-
21
-
22
-
23
 |
 |
14
2.10
Expansion Slot Device Installation
When installing graphics cards or other expansion cards, you must
first remove the rear place covering the expansion slots.
1.
With the rear of the case facing you, remove the 2 screws
shown to remove the plate.
2.
Install your expansion cards according to the manufacturer’s
instructions.
3.
Repalce the plate and screws.
Remove these screws prior to expansion card installation