Apple M8862LL PowerPC Manual - Page 27
that only an Apple-certified technician install additional RAM.
UPC - 718908454350
View all Apple M8862LL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Warning Electrical equipment may be hazardous if misused. Operation of this product, or similar products, must always be supervised by an adult. Do not allow children access to the interior of any electrical product and do not permit them to handle any cables. Never push objects of any kind into this product through the openings in the case. Doing so may result in fire or a dangerous electric shock. For your own safety and that of your equipment, always disconnect the power plug (by pulling the plug, not the cord) and remove the battery if any of the following conditions exists: m you want to remove any parts (leave the cord disconnected as long as the keyboard is open) m the power cord or plug becomes frayed or otherwise damaged m you spill something into the case m your computer is exposed to rain or any other excess moisture m your computer has been dropped or the case has been otherwise damaged m you suspect that your computer needs service or repair m you want to clean the case (use only the recommended procedure) Important The only way to disconnect power completely is to unplug the power cord and remove the battery. Make sure at least one end of the power cord is within easy reach so that you can unplug the computer when you need to. Warning To avoid damage to your computer, Apple recommends that only an Apple-certified technician install additional RAM. Consult the service and support information that came with your computer for instructions on how to contact an Apple-authorized service provider or Apple for service. If you attempt to install additional RAM yourself, any damage you may cause to your equipment will not be covered by the limited warranty on your computer. See an Apple-authorized dealer or service provider for additional information about this or any other warranty question. To clean the case, do the following: 1 Disconnect the power plug and remove the battery. (Pull the plug, not the cord.) 2 Wipe the surfaces lightly with a clean, soft cloth dampened with water. Warning Do not use any substance containing isopropyl alcohol. It can damage the case. 27