Apple M8881LL Setup Guide - Page 28
If Your AirPort Extreme Isn’t Responding, To return your AirPort Extreme to the factory settings
UPC - 718908453315
View all Apple M8881LL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
If Your AirPort Extreme Isn't Responding Try unplugging it and plugging it back in. If your AirPort Extreme stops responding completely, you may need to reset it to the factory default settings. Important: Resetting your AirPort Extreme to factory default settings erases all of your base station settings and resets them to the settings that came with your AirPort Extreme. To return your AirPort Extreme to the factory settings: Use the tip of a ballpoint pen to press and hold down the reset button until the status light flashes quickly (about 5 seconds). The AirPort Extreme resets with the following settings: ÂÂ The AirPort Extreme receives its IP address using DHCP. ÂÂ The network name reverts to Apple Network XXXXXX (where XXXXXX is replaced with the last six digits of the AirPort ID). ÂÂ The base station password returns to public. If your base station is still not responding, try the following: 1 Unplug your AirPort Extreme. 2 Use the tip of a ballpoint pen to hold down the reset button while you plug in your AirPort Extreme. 28 Chapter 4 Tips and Troubleshooting