Archos 500619 User Manual - Page 25
Note: In some rare cases the ON/OFF functionality may not work.
UPC - 690590506190
View all Archos 500619 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
the Infrared Emitter stuck to your device and turn your device on and off. Click this test button again and your device should change from on to off or off to on. If pressing this button does not turn on and off your device, try the next code for your device (step 3 above). If none of the codes work, check that the infrared emitter is directly over the infrared sensor on your tuner device. Note: In some rare cases the ON/OFF functionality may not work. Parameter Description Key: -/-- Set this to On if normally, you have to press this same key on your device's remote control in order to select a channel. Number of digits Set the number of digits that your device can recognize for a channel. Example: Set to 3 if you need to choose a channel greater than channel 99. Key: Enter Set this to On if normally, you have to press the Enter key on your device's remote control after you enter the channel number. Example: If you normally press 1, 3, Enter for channel 13, then you would need to set this parameter to On. Key Delay Change the delay between the emission of each digit of a channel. You may need to adjust this if the AV400 seems to send only half the digits of a channel or more digits of a channel. Example: Adjust the key delay and retest channel select if it sends channel 1 instead of 12 or sends 112 instead of 12. 25