Archos 500872 User Manual - Page 6

604 wifi MANUAL V1.2 Connecting to a WiFi Network > p.  In the list of available networks, for each network you will see the following information: the name of the network (SSID), if it is broadcasted (if the SSID is not broadcasted, you will be prompted to enter it in the next configuration screen) configuration status: configured network unconfigured network the type of authentication key that is required Open network WPA key WEP key WPA2 key this icon will appear if you are currently connected to this network the strength of the signal the channel used by the network the type of network (Infrastructure or Ad-Hoc) (Ad-Hoc networks are not supported at this time) To select a network and start the connection process, simply tap on the one that you want to connect to (your home wireless network or a free hotspot), or select it using / and pressing OK. You will be taken to the configuration screen for this network, where you will have to enter some information to set up your access to this network. 1.2 WiFi Network Configuration In order to connect to a wireless network, the ARCHOS 604 WIFI will need some specific information about the network. Your device will automatically pick up certain pieces of information that it needs. You can enter the rest of the information manually in the network's configuration screen, as shown in the following sections. Note that your device will remember the network connection information that you enter, in order to re-use it and connect automatically to the network when it is in range.