Archos 500948 User Manual - Page 43
Wifi Network Configuration
![]() |
UPC - 690590509481
View all Archos 500948 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
GEN 5 MANUAL V2.0 Connecting to a WiFi Network > P. 43 1. Configuration status: configured network unconfigured network 2. The name of the network (SSID), if it is broadcasted (if the SSID is not broad- casted, you will be prompted to enter it in the next configuration screen). 3. The strength of the signal. 4. The type of encryption key that is required: Open network (no key) WEP key WPA key WPA2 key 5. The channel used by the network. 6. The type of network (Infrastructure or Ad-Hoc). Ad-Hoc networks are not sup- ported at this time. • Select the network that you want to connect to (your home wireless network or a free hotspot). • You will be taken to the configuration screen for this network, where you will have to enter some information to set up your access to this network. 5.2 WiFi Network Configuration In order to connect to a wireless network, the ARCHOS will need some specific information about the network. Your device will automatically pick up certain pieces of information that it needs from the WiFi hot spot. You can enter the rest of the information manually in the network's configuration screen, as shown in the following sections. Note that your device will remember the network connection information that you enter, in order to re-use it and connect automatically to the network when it is in range.
![](/manual_guide/products/archos-605-wifi-4gb-user-manual-b60c2df/43.png)