Archos 501011 User Manual - Page 3

5 1 Ports, Buttons, and Connections BA C E GIH D F A Headphone Jack B USB 2.0 port - To connect your ARCHOS device to a computer, to transfer files and/or charge the battery. C On button (hold 3 seconds) & Menu options D Off button (hold 3 seconds) & Stop/Escape* Navigation pad E Move Up & increase volume F Move Down & decrease volume G Move Left (decrease value) or audio/video rewind H Move Right (increase value) or audio/video fast forward I Play/Pause/Resume/Enter * Hardware reset: in the event that the ARCHOS 105 freezes operation, you can reset your device by holding down on the STOP/ESC button for 15 seconds. 5 6 2 First Time Usage 2.1 Charging the Battery Before using your ARCHOS 105 for the first time, completely charge the battery. • The ARCHOS 105 is charged through its USB connector. Connect the included USB cable to a running computer and plug the other end into the ARCHOS 105 while it is off. This will charge its internal battery. • A lightning bolt symbol will flash over the battery icon in the status bar while the battery is charging: . • It will stop flashing when the battery is fully charged: . 2.2 Turning the ARCHOS 105 ON and OFF • Press and hold the ON/Menu button until the screen comes on. • The ARCHOS 105 will automatically shut off after a given amount of time if no buttons are pressed. To conserve battery energy, the backlight will automatically shut off. You can change these parameters in Setup > Power. • Press and hold the Stop/off button until the ARCHOS 105 shuts off. 2.3 Changing the Interface language • English is selected as the default language for your ARCHOS 105 user interface. You can choose another language by going to Setup > Display. 6